Kyocera copier manual More about the Off mode

Page 39

Section 4 BASIC OPERATION

Off mode

The Off mode automatically turns most of the power to the copier off if no operation has been performed on the copier for a pre-set period of time (between 15 and 240 minutes). “-” will be shown on the copy quantity/magnification display, but everything else on the operation panel will go out.

The factory default setting is for 30 minutes.

It is possible to engage the Off mode manually.

Press down on the Reset/Power key for at least 3 seconds. The Off mode will engage immediately.

NOTE

When the Off mode is engaged, all power to the copier, except that to the operation panel, is turned off. When the power switch is turned OFF ({), all power to the copier, including to the operation panel, is turned off.

To enable copying again, press any one of the keys on the operation panel.

More about the Off mode

The Off mode is a power-saving feature which automatically turns most of the power to the copier off when a certain time elapses without any operation being performed.

Copiers are generally in a standby mode more than they are in actual operation, so power consumption during this standby period occupies a large part of overall consumption. Having the copier enter the Off mode automatically after a certain amount of time reduces unnecessary power consumption during the standby period or at night if the copier happens to be left on accidentally. The result is a lower electricity bill.

NOTES

•It is possible to set the amount of time before the Off mode engages. (See “Off Mode Time” on page 6-4.)

•It is also possible to disable the Off mode. (See “Off Mode ON/OFF” on page 6-4.)

4-7

Image 39

Contents 1500 Page IMPORTANT! Please Read First Copy Default SettingsTroubleshooting Maintenance and Operation InformationContents Iii Preset Zoom mode Image quality selectionEco-Copy mode See 200%Paper Recycling Low Power ModeOff Mode About the International Energy Star ProgramSymbols Page Label IMPORTANT! Please Read FirstOther precautions Installation PrecautionsPrecautions for USE Other precautions Cdrh Act Safety of laser beamMaintenance Safety switchPage Limited Warranty for NEW Copier Model Page Main Body Names of PartsStopper extension lock DrawerPaper width guides Paper stopperRight cover anchor pin Power switchPower cord Document Processor connector Face-up trayOperation panel Auto Clear function Auto Drawer Switching functionNames of Parts Preparations Loading paperLoading paper into a drawer Preparations Preparations Selecting the paper size Code number Size Setting paper on the multi-bypass trayInch Specification Metric Specification A4 A6R, and FolioPreparations XXX Selecting the paper size standard settingSelecting the paper size temporary setting Thick Paper mode Attaching the face-up tray Basic Operation Basic copying procedureStart copying Adjusting the copy exposureSetting the number of copies to be made Setting an originalAt the end of copying Zoom mode Making enlarged and reduced copies50% Preset Zoom mode Low Power mode More about the Off mode Off modeBasic Operation In-1 Metric specificationCopy Functions Layout modesCopy Functions When setting the originals on the platenWhen setting the originals in the Document Processor Press the 2in1/4in1 key until the 2in1 indicator lights Press the 2in1/4in1 key until the 4in1 indicator lights Selecting the borderline Code number Borderline types Selecting the order of 4-in-1 layoutCopy Functions Original Copy Press the Sort key to light the Sort indicator Sort modeUsing programmed settings to make copies Program functionRegistering the program Copy Default Settings Available default itemsDefault Description Available settings Reference Number Copy Default Settings Non-Standard Size Paper Width and it Mode ON/OFF Copy Default Settings Accessing and changing the default settings Sample User Copy Setting List Copy Default Settings Copy Default Settings Copy Default Settings Copy Default Settings Checking the total copy count and printing out a report Names of parts Optional EquipmentDocument Processor Acceptable originalsOptional Equipment Setting originals in the Document ProcessorSetting originals on the platen Additional Memory Paper FeederTroubleshooting Indication Procedure ReferenceIf one of the following indications is displayed Troubleshooting If paper jams Misfeed location indicatorsPaper jam inside the copier Removal proceduresPaper jam in a drawer Paper jam in the paper eject section Original jam in the optional Document Processor Paper jam in the multi-bypass trayTroubleshooting If other trouble occurs Trouble Checkpoint Procedure ReferenceTroubleshooting Cleaning the copier Maintenance and Operation InformationReplacing the toner container Maintenance and Operation Information Cleaner Home Position Cleaning the charger and the registration rollerClose the front cover Close the upper front cover Main Body SpecificationsDocument Processor option Paper Feeder optionAdditional Memory option Environmental Specifications Duplex 2-sided copyingPaper feed Additional Memory Paper Feeder Document Processor Optional equipmentAvailable options Document ProcessorFunction selected first Function selected second Appendix Functions and settings combination chartNumerics IndexToner Coverage Report default setting Total copy count Memo Page Page 2003