Quick Start cont.
Tilt and Swivel
Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1).
Remove Monitor Stand for
Mounting
To prepare the monitor for alternate mount- ing purposes:
1. Disconnect all cables. | Figure TS.1 |
2.Place hands on each side of
the monitor and lift up to the highest position (Figure RL.1).
3.Place monitor face down on a
(Figure S.1)
Figure S.1
4.Remove the stand cover by sliding the top/bottom pieces off the stand (Figure S.2). Remove the 4 screws connecting the monitor to the stand and lift off the stand assembly (Figure S.3). The monitor is now ready for mounting in an alternate manner.
5.Reverse this process to reattach stand.
NOTE: Use only
4 |
3 |
1 |
2 |
Figure S.2 and Figure S.3
9
78133813.wpc | 11 | 10/28/99, 3:21 PM |