NEC P600 manual Removing the Memory Module, Removing Heat plate from base unit

Fig. 12 Removing Heat plate from base unit

Note: When assembling the heat plate, make sure that these three hocks on the heat plate are properly inserted into the openings located on the top cover.

Removing the Memory Module

To remove the memory module, first remove the Keyboard cover (see Removing the keyboard cover), remove the keyboard (see Removing the keyboard), remove heat plate (see Removing heat plate) then perform the following steps:

1. Unclip memory module as shown in Fig. 13

Fig. 13 Removing the memory module

2. Remove the Memory Module from its slot and put it aside.

NEC Versa P600 Disassembly Manual Page 10