Removing the LCD Panel
To remove the LCD Panel, first remove the LCD Module (see Removing the LCD Module), then perform the following steps:
1. Unscrew all screws shown in Fig. 22
AAAA
BB
Fig. 22 Screws on the LCD Module
2.Release the LCD Bezel carefully and put it aside as shown in Fig. 23
Fig. 23 Removing the LCD Bezel
3. Unscrew all screws encircled in Fig. 24 disconnect the inverter board and put it aside.
A = M2x3.5
Silver
B= M2x5
Silver
NEC Versa P600 Disassembly Manual | Page 15 |