Removing the Battery
Perform the following steps to remove the battery:
1.Make sure to power off the Versa P600.
2.Turn the unit upside down.
3.Unlock the battery and slide it out of its place as the arrow shows in Fig. 1
Fig. 1 Removing the battery
Removing the Hard Disk Drive
To remove the hard disk drive, first remove the battery (see Removing the Battery), then perform the following steps:
1. Remove the screws as shown in Fig. 2
Fig. 2 Removing the Hard disk drive cover
M2.5x11 Black
NEC Versa P600 Disassembly Manual | Page 5 |