Removing the LCD Module
To remove LCD Module, first remove the Keyboard Cover (see Removing the keyboard cover) then remove the keyboard (see Removing the keyboard):
1.Unscrew the two LCD connector screws and also, disconnect the speaker connector as shown in Fig. 18
Fig. 18 Disconnecting the LCD & speaker connectors
2. Remove the LCD cable cover with a small flat screws driver as shown in Fig. 19 .
Fig. 19 Removing the LCD cable Cover
3. Release the screws at rear side of the unit as shown in Fig. 20
M2.5x11 Black
NEC Versa P600 Disassembly Manual | Page 13 |