Lexmark 752 setup guide Unpack the printer, Setting up a multifunction printer, Unpacking

Page 10

Step 1: Unpack the printer

Setting up a multifunction printer

Note: More information is available on our Lexmark Web site at www.lexmark.com/multifunctionprinters.

If you purchased a multifunction printer (MFP) that copies, faxes, and scans, refer to the documentation that came with the device to see if furniture or other hardware needs to be set up first.

Unpacking

CAUTION: The printer weighs 47.7 kg (105 lb) and requires at least two people to lift it safely.

160 cm

(63 in.)

38 cm

(15 in.)

30 cm

(12 in.)

51 cm

(20 in.)

61 cm

(24 in.)

1 Select a location for your Lexmark™ C752 printer:

•Leave enough room to open the printer trays, covers, and doors; access options; and allow for proper ventilation.

•Provide the proper environment:

–A firm, level surface

–Away from the direct airflow of air conditioners, heaters, or ventilators

–Free of temperature, sunlight, or humidity extremes or fluctuations

–Clean, dry, and free of dust

Unpack the printer

1

Image 10

Contents C752 Page English Edition June Contents Install drivers for local printing Introduction About your printerOther sources of information Publications CD Quick Reference pagesDrivers CD Quick Reference and Clearing Jams sheetsLexmark’s Web site Unpack the printer Setting up a multifunction printerUnpacking Power cord Drivers CD Set up the printer and paper handling options You may have purchasedInstalling a 2000-sheet drawer Leveling feet Installing a 500-sheet drawer Installing a duplex unit Positioning the printer Set up the printer and paper handling options Installing an output expander Set up the printer and paper handling options Installing a 5-bin mailbox Set up the printer and paper handling options Set up the print supplies Setting up the print cartridgesGuides Detensioner Set up the print supplies Set up the print supplies Attaching an adhesive operator panel overlay What do I do next? Install memory, firmware, or option cards Removing the system board access cover Use the following table to locate the instructions you need Installing a memory card What do I do now?Installing a firmware card Installing a hard disk What do I do now? Installing an option card Card FunctionSecure the card to the system board with the screw Install memory, firmware, or option cards Load paper Loading the 500-sheet trays Maximum height guide Loading the 2000-sheet tray LT.LG Loading the multipurpose feeder Load paper Load paper Attach cables and power cord Attaching a local cableAttach cables and power cord Parallel SerialAttaching a network cable EthernetFiber optic 802.11b wireless options Install drivers for local printing Operating system Cable Go toWindows With USB or Using WindowsUsing Windows Me Parallel cableUsing Windows 98 with a USB or parallel cable Page Macintosh Creating a desktop printer icon MacintoshCreating a queue in Print Center Macintosh OS UNIX/Linux Verify printer setup Printing a menu settingsVerify printer setup Configure for TCP/IP Assigning a printer IP addressVerifying the IP settings Configuring for Pull Printing PingInstall drivers for network printing Supported printer driversClick Install Printer and Software Install a custom printer driver Install the printer driver or subset on network clients Macintosh Install a custom PPD file Mac OS 8.6 toMac OS X version 10.1.2 and later Create a print queue in Print CenterUNIX/Linux NetWare Using the publications CD Viewing and using the CD contents Congratulations