Lexmark 752 setup guide Installing an option card, Card Function

Page 37

Installing an option card

Your printer has one expansion card slot that supports a number of option cards. The following table describes their function.

Card	Function
MarkNet internal print server	Adds an Ethernet or Token-Ring port so you can connect your printer to a
	network.
	Install a MarkNet™ N2501e or N2401e internal print server if you received
	either of these cards as part of a multifunction printer upgrade.

Parallel 1284-B Interface Card	Adds a parallel port.

Coax/Twinax Adapter for SCS	Adds a coaxial/twinaxial port.

Serial Interface Card	Adds a serial port.

Note: The network models ship with an Ethernet print server already installed.

You need a small Phillips screwdriver to install these options.

1 Remove the system board access cover (see Page 22).

2 Remove the screw from the metal plate that covers the connector slot, and then lift the plate off.

Save the screw.

	Warning: Option cards are easily damaged by static	3 Unpack the option card.
	electricity. Touch something metal on the printer before	Save the packing materials.
	you touch an option card.	Save the packing materials.
	you touch an option card.

Install memory, firmware, or option cards

28

Image 37

Contents C752 Page English Edition June Contents Install drivers for local printing About your printer IntroductionPublications CD Quick Reference pages Other sources of informationDrivers CD Quick Reference and Clearing Jams sheetsLexmark’s Web site Unpack the printer Setting up a multifunction printerUnpacking Power cord Drivers CD You may have purchased Set up the printer and paper handling optionsInstalling a 2000-sheet drawer Leveling feet Installing a 500-sheet drawer Installing a duplex unit Positioning the printer Set up the printer and paper handling options Installing an output expander Set up the printer and paper handling options Installing a 5-bin mailbox Set up the printer and paper handling options Setting up the print cartridges Set up the print suppliesGuides Detensioner Set up the print supplies Set up the print supplies Attaching an adhesive operator panel overlay What do I do next? Install memory, firmware, or option cards Removing the system board access cover Use the following table to locate the instructions you need What do I do now? Installing a memory cardInstalling a firmware card Installing a hard disk What do I do now? Card Function Installing an option cardSecure the card to the system board with the screw Install memory, firmware, or option cards Load paper Loading the 500-sheet trays Maximum height guide Loading the 2000-sheet tray LT.LG Loading the multipurpose feeder Load paper Load paper Attaching a local cable Attach cables and power cordAttach cables and power cord Serial ParallelEthernet Attaching a network cableFiber optic 802.11b wireless options Operating system Cable Go to Install drivers for local printingWindows Using Windows Me Using WindowsWith USB or Parallel cableUsing Windows 98 with a USB or parallel cable Page Creating a desktop printer icon Macintosh MacintoshCreating a queue in Print Center Macintosh OS UNIX/Linux Printing a menu settings Verify printer setupVerify printer setup Assigning a printer IP address Configure for TCP/IPPing Verifying the IP settings Configuring for Pull PrintingSupported printer drivers Install drivers for network printingClick Install Printer and Software Install a custom printer driver Install the printer driver or subset on network clients Macintosh Mac OS 8.6 to Install a custom PPD fileCreate a print queue in Print Center Mac OS X version 10.1.2 and laterUNIX/Linux NetWare Viewing and using the CD contents Congratulations Using the publications CD