Lexmark 752 setup guide Mac OS 8.6 to, Install a custom PPD file

Page 70

Click Create.

Select the new printer from the list.

Insert the drivers CD into your CD-ROM drive. Double-clickClassic.

Double-click the Lexmark Installer icon.

Mac OS 8.6 to 9.x

Note: Installing the custom PPD is required only if this is the first time the printer has been set up. If the printer was previously installed, go on to “Step 2: Create a desktop printer” on page 61.

Step 1: Install a custom PPD file

1

2

3

4 Select the language of your operating system, and then click OK.

5 Click Install to install the PPD file for your printer.

Step 2: Create a desktop printer

1 In the Chooser, select the LaserWriter 8 driver.

2 If you have a routed network, select the default zone from the list. If you don’t know which zone to select, look on the Network Setup page under AppleTalk for Zone.

3

4 If you don’t know which printer to select, look on the Network Setup page under the AppleTalk heading to find the default name of the printer.

5

6 Make sure there is an icon next to the printer name in the Chooser.

7 Close the Chooser window.

8 Verify printer installation.

aClick the desktop printer icon you just created.

bChoose Printing Change Setup.

•If the PPD file displayed in the PostScript Printer Description (PPD) file portion of the menu is correct for your printer, printer setup is complete.

•If the PPD file displayed in the PostScript Printer Description (PPD) file portion of the menu is not correct for your printer, repeat “Step 1: Install a custom PPD file” on page 62.

61

Image 70

Contents C752 Page English Edition June Contents Install drivers for local printing Introduction About your printerOther sources of information Publications CD Quick Reference pagesDrivers CD Quick Reference and Clearing Jams sheetsLexmark’s Web site Unpack the printer Setting up a multifunction printerUnpacking Power cord Drivers CD Set up the printer and paper handling options You may have purchasedInstalling a 2000-sheet drawer Leveling feet Installing a 500-sheet drawer Installing a duplex unit Positioning the printer Set up the printer and paper handling options Installing an output expander Set up the printer and paper handling options Installing a 5-bin mailbox Set up the printer and paper handling options Set up the print supplies Setting up the print cartridgesGuides Detensioner Set up the print supplies Set up the print supplies Attaching an adhesive operator panel overlay What do I do next? Install memory, firmware, or option cards Removing the system board access cover Use the following table to locate the instructions you need Installing a memory card What do I do now?Installing a firmware card Installing a hard disk What do I do now? Installing an option card Card FunctionSecure the card to the system board with the screw Install memory, firmware, or option cards Load paper Loading the 500-sheet trays Maximum height guide Loading the 2000-sheet tray LT.LG Loading the multipurpose feeder Load paper Load paper Attach cables and power cord Attaching a local cableAttach cables and power cord Parallel SerialAttaching a network cable EthernetFiber optic 802.11b wireless options Install drivers for local printing Operating system Cable Go toWindows With USB or Using WindowsUsing Windows Me Parallel cableUsing Windows 98 with a USB or parallel cable Page Macintosh Creating a desktop printer icon MacintoshCreating a queue in Print Center Macintosh OS UNIX/Linux Verify printer setup Printing a menu settingsVerify printer setup Configure for TCP/IP Assigning a printer IP addressVerifying the IP settings Configuring for Pull Printing PingInstall drivers for network printing Supported printer driversClick Install Printer and Software Install a custom printer driver Install the printer driver or subset on network clients Macintosh Install a custom PPD file Mac OS 8.6 toMac OS X version 10.1.2 and later Create a print queue in Print CenterUNIX/Linux NetWare Using the publications CD Viewing and using the CD contents Congratulations