Lexmark 752 setup guide Installing a 500-sheet drawer

Page 15

Installing a 500-sheet drawer

Warning: If you have an optional duplex unit and a 2000-sheet drawer, you must install a 500-sheet drawer between the duplex unit and the 2000-sheet drawer.

Your printer supports up to three additional 500-sheet drawers. However, if you install a 2000-sheet drawer, you can only add one additional 500-sheet drawer.

1 Unpack the 500-sheet drawer and remove any packing material.

2 Place the drawer in the location you have chosen for your printer or install it on another drawer:

aAlign the holes in the 500-sheet drawer with the positioning posts on the lower drawer.

bLower the 500-sheet drawer into place. Make sure it is seated securely on the other drawer.

3 If you are installing a 500-sheet drawer on top of a 2000-sheet drawer, secure them with stabilizing screws.

aInsert the screws through the holes next to the positioning posts on the 500-sheet drawer.

bHand-tighten the screws.

Even when fully inserted, the screws allow some space between the drawers.

4 Install another 500-sheet drawer, or continue with “Installing a duplex unit” on page 7 or “Positioning the printer” on page 8.

Set up the printer and paper handling options

6

Image 15
Contents C752 Page English Edition June Contents Install drivers for local printing About your printer IntroductionPublications CD Quick Reference pages Other sources of informationQuick Reference and Clearing Jams sheets Drivers CDLexmark’s Web site Setting up a multifunction printer Unpack the printerUnpacking Power cord Drivers CD You may have purchased Set up the printer and paper handling optionsInstalling a 2000-sheet drawer Leveling feet Installing a 500-sheet drawer Installing a duplex unit Positioning the printer Set up the printer and paper handling options Installing an output expander Set up the printer and paper handling options Installing a 5-bin mailbox Set up the printer and paper handling options Setting up the print cartridges Set up the print suppliesGuides Detensioner Set up the print supplies Set up the print supplies Attaching an adhesive operator panel overlay What do I do next? Install memory, firmware, or option cards Removing the system board access cover Use the following table to locate the instructions you need What do I do now? Installing a memory cardInstalling a firmware card Installing a hard disk What do I do now? Card Function Installing an option cardSecure the card to the system board with the screw Install memory, firmware, or option cards Load paper Loading the 500-sheet trays Maximum height guide Loading the 2000-sheet tray LT.LG Loading the multipurpose feeder Load paper Load paper Attaching a local cable Attach cables and power cordAttach cables and power cord Serial ParallelEthernet Attaching a network cableFiber optic 802.11b wireless options Operating system Cable Go to Install drivers for local printingWindows Parallel cable Using WindowsUsing Windows Me With USB orUsing Windows 98 with a USB or parallel cable Page Creating a desktop printer icon Macintosh MacintoshCreating a queue in Print Center Macintosh OS UNIX/Linux Printing a menu settings Verify printer setupVerify printer setup Assigning a printer IP address Configure for TCP/IPPing Verifying the IP settings Configuring for Pull PrintingSupported printer drivers Install drivers for network printingClick Install Printer and Software Install a custom printer driver Install the printer driver or subset on network clients Macintosh Mac OS 8.6 to Install a custom PPD fileCreate a print queue in Print Center Mac OS X version 10.1.2 and laterUNIX/Linux NetWare Viewing and using the CD contents Congratulations Using the publications CD