Lexmark 752 setup guide Installing a firmware card

Page 34

Installing a firmware card

Note: Firmware and flash memory cards offered for other Lexmark printers cannot be used with your printer.

Warning: Firmware and flash memory cards are easily damaged by static electricity. Touch something metal on the printer before you touch a card.

Pins

What do I do now?

Follow the instructions in this section to install an optional firmware or flash memory card.

Only one of each type of card is supported.

1 Remove the system board access cover (see Page 22).

2 Unpack the card.

Avoid touching the metal pins on the bottom of the card. Save the packaging.

3 Holding the card by its sides, align the pins on the card with the holes on the system board.

4 Push the card firmly into place.

The entire length of the connector on the card must touch the system board.

Be careful not to damage the card connectors.

Task	Go to page…

Installing a hard disk	26

Installing an option card	28

Replacing the system board access cover	30

Install memory, firmware, or option cards

25

Image 34

Contents C752 Page English Edition June Contents Install drivers for local printing Introduction About your printerOther sources of information Publications CD Quick Reference pagesDrivers CD Quick Reference and Clearing Jams sheetsLexmark’s Web site Unpack the printer Setting up a multifunction printerUnpacking Power cord Drivers CD Set up the printer and paper handling options You may have purchasedInstalling a 2000-sheet drawer Leveling feet Installing a 500-sheet drawer Installing a duplex unit Positioning the printer Set up the printer and paper handling options Installing an output expander Set up the printer and paper handling options Installing a 5-bin mailbox Set up the printer and paper handling options Set up the print supplies Setting up the print cartridgesGuides Detensioner Set up the print supplies Set up the print supplies Attaching an adhesive operator panel overlay What do I do next? Install memory, firmware, or option cards Removing the system board access cover Use the following table to locate the instructions you need Installing a memory card What do I do now?Installing a firmware card Installing a hard disk What do I do now? Installing an option card Card FunctionSecure the card to the system board with the screw Install memory, firmware, or option cards Load paper Loading the 500-sheet trays Maximum height guide Loading the 2000-sheet tray LT.LG Loading the multipurpose feeder Load paper Load paper Attach cables and power cord Attaching a local cableAttach cables and power cord Parallel SerialAttaching a network cable EthernetFiber optic 802.11b wireless options Install drivers for local printing Operating system Cable Go toWindows With USB or Using WindowsUsing Windows Me Parallel cableUsing Windows 98 with a USB or parallel cable Page Macintosh Creating a desktop printer icon MacintoshCreating a queue in Print Center Macintosh OS UNIX/Linux Verify printer setup Printing a menu settingsVerify printer setup Configure for TCP/IP Assigning a printer IP addressVerifying the IP settings Configuring for Pull Printing PingInstall drivers for network printing Supported printer driversClick Install Printer and Software Install a custom printer driver Install the printer driver or subset on network clients Macintosh Install a custom PPD file Mac OS 8.6 toMac OS X version 10.1.2 and later Create a print queue in Print CenterUNIX/Linux NetWare Using the publications CD Viewing and using the CD contents Congratulations