Lexmark 752 setup guide Install memory, firmware, or option cards

Page 30

Step 4: Install memory, firmware, or option cards

CAUTION: If you are installing memory or option cards sometime after setting up the printer, turn the printer off and unplug the power cord before continuing.

Note: You need a small Phillips screwdriver to remove the system board access cover and to install some of the cards.

If you do not have any memory, firmware, or option cards to install, skip this step and go to Step 5: “Load paper” on page 31.

You can customize your printer memory capacity and connectivity by adding optional cards.

The instructions in this section help you install any of the following:

•Memory cards

–Printer memory

•Firmware cards

–Additional functionality

–Internet capabilities

–Flash memory

•Option cards

–Hard disk with adapter card

–MarkNet™ internal print servers (also called internal network adapters or INAs)

–Serial Interface Card

–Parallel 1284-B Interface Card

Install memory, firmware, or option cards

21

Image 30

Contents C752 Page English Edition June Contents Install drivers for local printing Introduction About your printerOther sources of information Publications CD Quick Reference pagesQuick Reference and Clearing Jams sheets Drivers CDLexmark’s Web site Setting up a multifunction printer Unpack the printerUnpacking Power cord Drivers CD Set up the printer and paper handling options You may have purchasedInstalling a 2000-sheet drawer Leveling feet Installing a 500-sheet drawer Installing a duplex unit Positioning the printer Set up the printer and paper handling options Installing an output expander Set up the printer and paper handling options Installing a 5-bin mailbox Set up the printer and paper handling options Set up the print supplies Setting up the print cartridgesGuides Detensioner Set up the print supplies Set up the print supplies Attaching an adhesive operator panel overlay What do I do next? Install memory, firmware, or option cards Removing the system board access cover Use the following table to locate the instructions you need Installing a memory card What do I do now?Installing a firmware card Installing a hard disk What do I do now? Installing an option card Card FunctionSecure the card to the system board with the screw Install memory, firmware, or option cards Load paper Loading the 500-sheet trays Maximum height guide Loading the 2000-sheet tray LT.LG Loading the multipurpose feeder Load paper Load paper Attach cables and power cord Attaching a local cableAttach cables and power cord Parallel SerialAttaching a network cable EthernetFiber optic 802.11b wireless options Install drivers for local printing Operating system Cable Go toWindows With USB or Using WindowsUsing Windows Me Parallel cableUsing Windows 98 with a USB or parallel cable Page Macintosh Creating a desktop printer icon MacintoshCreating a queue in Print Center Macintosh OS UNIX/Linux Verify printer setup Printing a menu settingsVerify printer setup Configure for TCP/IP Assigning a printer IP addressVerifying the IP settings Configuring for Pull Printing PingInstall drivers for network printing Supported printer driversClick Install Printer and Software Install a custom printer driver Install the printer driver or subset on network clients Macintosh Install a custom PPD file Mac OS 8.6 toMac OS X version 10.1.2 and later Create a print queue in Print CenterUNIX/Linux NetWare Using the publications CD Viewing and using the CD contents Congratulations