Lexmark 752 setup guide Installing a hard disk

Page 35

Attach the ribbon cable to the hard disk.

Installing a hard disk

Warning: Hard disks are easily damaged by static electricity. Touch something metal on the printer before you touch a disk.

Hard disk

Ribbon cable

Mounting plate

Follow the instructions in this section to install an optional hard disk. You need a small Phillips screwdriver to attach the hard disk to the mounting plate.

If an option card has been installed, you may need to remove it before installing the hard disk.

1 Remove the system board access cover (see Page 22).

2 Remove the mounting plate, hard disk, ribbon cable, and attachment screws from the package.

3 Align the ribbon cable connector with the connector pins on the hard disk.

4

5 Align the screw holes on the mounting plate with the holes in the hard disk.

6 Secure the mounting plate to the hard disk with the screws.

Install memory, firmware, or option cards

26

Image 35

Contents C752 Page English Edition June Contents Install drivers for local printing About your printer IntroductionPublications CD Quick Reference pages Other sources of informationLexmark’s Web site Quick Reference and Clearing Jams sheetsDrivers CD Unpacking Setting up a multifunction printerUnpack the printer Power cord Drivers CD You may have purchased Set up the printer and paper handling optionsInstalling a 2000-sheet drawer Leveling feet Installing a 500-sheet drawer Installing a duplex unit Positioning the printer Set up the printer and paper handling options Installing an output expander Set up the printer and paper handling options Installing a 5-bin mailbox Set up the printer and paper handling options Setting up the print cartridges Set up the print suppliesGuides Detensioner Set up the print supplies Set up the print supplies Attaching an adhesive operator panel overlay What do I do next? Install memory, firmware, or option cards Removing the system board access cover Use the following table to locate the instructions you need What do I do now? Installing a memory cardInstalling a firmware card Installing a hard disk What do I do now? Card Function Installing an option cardSecure the card to the system board with the screw Install memory, firmware, or option cards Load paper Loading the 500-sheet trays Maximum height guide Loading the 2000-sheet tray LT.LG Loading the multipurpose feeder Load paper Load paper Attaching a local cable Attach cables and power cordAttach cables and power cord Serial ParallelEthernet Attaching a network cableFiber optic 802.11b wireless options Operating system Cable Go to Install drivers for local printingWindows Parallel cable Using WindowsUsing Windows Me With USB orUsing Windows 98 with a USB or parallel cable Page Creating a desktop printer icon Macintosh MacintoshCreating a queue in Print Center Macintosh OS UNIX/Linux Printing a menu settings Verify printer setupVerify printer setup Assigning a printer IP address Configure for TCP/IPPing Verifying the IP settings Configuring for Pull PrintingSupported printer drivers Install drivers for network printingClick Install Printer and Software Install a custom printer driver Install the printer driver or subset on network clients Macintosh Mac OS 8.6 to Install a custom PPD fileCreate a print queue in Print Center Mac OS X version 10.1.2 and laterUNIX/Linux NetWare Viewing and using the CD contents Congratulations Using the publications CD