Lexmark 752 setup guide Loading the multipurpose feeder

6 Place the paper against the back left corner of the tray, print side down.

Do not load bent or wrinkled paper.

7 Close the tray.

Make sure the tray is pushed completely into the printer.

Note: Do not exceed the maximum stack height.

Overfilling the tray may cause jams.

Loading the multipurpose feeder

You can use the multipurpose feeder one of two ways:

•Paper tray—As a paper tray, you can load paper in the feeder with the intention of leaving it in the feeder.

•Manual bypass feeder—As a manual bypass feeder, you send a print job to the feeder while specifying the type and size of media from your computer. The printer then prompts you to load the appropriate paper or specialty media before it prints.

Load paper

36