User’s Guide – version 3.5 | NetFlow Tracker |
dstport – specifies an acceptable destination application port number. Format as for srcport above.
dstport_exclude=true – specifies that the supplied destination application port numbers are excluded rather than included.
srcappl – specifies an acceptable source IP application.
<port>/<name> | The application, with port being the application |
| port number in the range |
| being the protocol name, such as TCP or UDP |
<port>/<number> | The application, with port being the application |
| port number and number being the protocol |
| number in the range |
| A range of application ports, with port1 being |
| the start of the range, port2 the end and name |
| being the protocol name |
| A range of application ports, with port1 being |
| the start of the range, port2 the end and |
| number being the protocol number |
<name> | The name of a grouped application |
srcappl_exclude=true – specifies that the supplied source applications are excluded rather than included.
dstappl – specifies an acceptable destination IP application. Format as for srcappl above.
dstappl_exclude=true – specifies that the supplied destination applications are excluded rather than included.
appl – specifies an acceptable source or destination IP application. Format as for srcappl above.
appl_exclude=true – specifies that the supplied source or destination applications are excluded rather than included.
recappl – specifies an acceptable recognised IP application. Format as for srcappl above.
recappl_exclude=true – specifies that the supplied recognised applications are excluded rather than included.
applid – specifies an acceptable identified application.
| <name> | The identified application name; see Device Settings for more | |
|
| information | |
| <id> | The identified application identifier | |
|
|
|
|
51