Fluke Computer Accessories manual HHmm, Applying a time-of-day mask to the time range

User’s Guide – version 3.5 NetFlow Tracker

edate_nunitsago – (optional) specifies the number of units before the time of report generation of the last day of the time range.

0The last day of the time range will be the first day of the unit following the current unit at the time of report generation

1The last day of the time range will be the first day of the current unit at the time of report generation (default)

<number>	The time range will extend to the end of this number of full units
	before the time of report generation

stime – specifies the time of day at which the time range starts.

<HH>:<mm>

The time, with <HH> being the hour in the 24-hour clock and <mm> being the minutes

etime – specifies the time of day at which the time range ends.

<HH>:<mm>

The time, with <HH> being the hour in the 24-hour clock and <mm> being the minutes

Applying a time-of-day mask to the time range

If the time range is longer than a day, you may wish to restrict it to just certain times on each day. You can select only working hours or only non-working hours, for example.

Note that if a long-term report has a configured time zone or mask, this parameter will have no effect.

timemask – specifies an inclusive mask to apply the to time range. To specify multiple inclusive masks, include a parameter name and value in the URL for each mask.

<day1>-<day2>/<time1>-<time2>

The range of weekdays and the times on those weekdays to include in the mask with a weekday being one of SUN, MON, TUE, WED, THU, FRI or SAT, day2 coming on or after day1 in the list above, a time being in the 24-hour form hh:mm, and time2 being after time1

timemask_exclude=true – specifies that the supplied time masks are excluded from the time range rather than included in it.

45