BMG7011 and BMG7012 User’s Guide Rev. 1.9
3.2DHCP Server Configuration
3.2.1DHCP Configuration
If the device mode is gateway mode, we support DHCP Server on LAN side to assign IP address, etc. to the PC(s) connected to the LAN port. You can set the Status, Last IP and Mode etc. on this page. After you make the settings, click OK for the settings to immediately take effect.
| Figure 9 – DHCP Configuration Window |
|
|
Item | Description |
|
|
Status | The DHCP Server is enabled or disabled. |
Last IP | The last IP can be assigned by the DHCP server. |
Mode | The network settings assigned to the DHCP Client is Auto mode or Manual Mode. In Auto mode, the DNS |
| settings are from the WAN side. In Manual mode, the DNS settings are from the user’s input in this page. |
DNS | You can manually set the value in Manual mode or it takes the value from WAN side in Auto mode. |
Domain | You can manually set the value in Manual mode or it takes the value from WAN side in Auto mode. |
Least time | The least time of the DHCP client to holding the network settings. The value is useful in Auto mode. |
© Copyright, 2004 Oki Network Technologies. All Rights Reserved | 20 |