Oki BMG7011, BMG7012 manual Appendix B Specifications

Page 70

BMG7011 and BMG7012 User’s Guide Rev. 1.8

Appendix B: Specifications

SPECIFICATIONS

USER INTERFACE

Subscriber Port: 1-Port (7011), 2-Port (7012), RJ11

PSTN Port: 1-Port Back-up PSTN Life Line, RJ11

LAN Port: 1-Port, 10B-T/100B-TX, RJ45

NETWORK INTERFACE

WAN Port: 1-Port, 10B-T/100B-TX, RJ45

VOIP PROTOCOLS

Call Control: H.323 v4 and v2, SIPv2, MGCPv1

Audio CODEC: G.711 u/A-law, G.729a, G.723.1

Fax Transmission: T.38 Real-Time, 2.4k-19.2kbps Automatic Fax Detection

H.450 Supplementary Service H.235 Security

MANAGEMENT PROTOCOLS

TELNET, TFTP, SYSLOG, SNMP, HTTP Server, NTP, STUN, PPPoE Client, DHCP Client

UNIT PERFORMANCE

Typical Unit Latency: G.711; 50ms, G.729a; 55ms, G.723.1; 135ms

Echo Cancellation: G.168, 30dB, 16ms

POWER REQUIREMENT

DC Input: 12VDC, 1A Power Adapter: Universal, 100 - 230VAC, 50/60Hz, 18W

PHYSICAL SPECIFICATIONS

Dimensions: W190(7.5) x D130(5) x H30(1.2) mm (in) Weight: 340g (0.75 lbs) Without Power Adapter

ENVIRONMENTAL

Operating Temperature: 0°C(32°F) To 40°C(104°F)

Storage Temperature: -10°C(14°F) To 70°C(158°F)

Operating Humidity: 10% To 90% Relative, Non-Condensing

Storage Humidity: 5% To 95% Relative, Non-Condensing

REGULATORY CERTIFICATIONS Safety: UL60950, EN60950

EMC: FCC Part 15 Class B, EN55022 Class B, CE marking Telecom: FCC Part 68, CTR21

Manufacturing: ISO 9001

© Copyright, 2003 Oki Network Technologies. All Rights Reserved

65

Image 70
Contents Broadband Media Gateway Document Revision History Copyrights Notice Contents 11.1 Features Package ContentsSystem Requirements Integrated Routing Features Hardware Installation Front View LEDsRear View Ports LineInitial Installation Procedures for Adsl and Cable Networks Configuring TCP/IP Protocol for Your PCConfiguring the BMG7011 and BMG7012 VoIP gateways Configuring via Web BrowserSupervisor Mode Setting your BMG to communicate through PPPoEBMG7011 and BMG7012 User’s Guide Rev Setting your BMG to communicate through Dhcp Select Dhcp within the WAN Configuration setup screen Setting your BMG to communicate through a Static IP address Installation Overview For Adsl and Cable Networks Example DSL installationPHONE1 & PHONE2 Web Interface Screen Descriptions Status System StatusPort Status Port Status WindowDhcpc Status DNSPPPoE Status PPPoE Status Window DescriptionPPPoE Configuration DescriptionDhcp Server Configuration Dhcp ConfigurationWAN Configuration WAN IPDescription Remote ProvisioningDevice Mode Device Mode Configuration WindowNTP 1 NTPNapt Configuration Port ForwardingIP Filter Configuration Window IP FilteringDMZ Configuration Window 3 DMZQoS Configuration QoSDscp Configuration VLan Configuration Mac Cloning Mac Cloning WindowPstn Configuration Switch KeyDigit Map LengthProvision Configuration GroupSyslog Configuration Syslog Configuration WindowEMS Configuration 11.1 EMSSnmp Community Configuration Window Snmp CommunitySnmp Trap Configuration Window Snmp Trap TargetVoIP Configuration ProtocolDescription UserMgcp RstpVoIP SIP Configuration Window 12.4 SIPSIP Domain Specifies the password for secured registration 12.5 H.323Dtmf Description CodecBMG7011 and BMG7012 User’s Guide Rev VoIP Caller ID Configuration Window 12.8 RTP RTP portTone Busy ToneCall Waiting Tone VoIP Fax Configuration Window 12.10 FAXStun NAT AddressSpeed Dial Add/ModifyCall Features Port Configure port 1 or port 2 For BMG7012 Only Call HoldPhone book Password Configuration Supervisor PasswordUser Password User Password WindowUpgrade Configuration FirmwareConfiguration Configuration Upgrade WindowSave Configuration SaveLoad Default Settings Load Default Settings WindowReboot Reboot WindowAppendix a Troubleshooting Appendix B Specifications