BMG7011 and BMG7012 User’s Guide Rev. 1.9
3.15Save
3.15.1Save Configuration
Whenever you change into a new configuration, you need to save the new configuration data and then restart the gateway unit to have the new settings take effect. Once you click on the “Save” button from the window below, the new configuration data is automatically written into the FLASH memory and the system will be refreshed with new data on your next reboot (refer to the following section “Reboot”).
Figure 46 – Save Configuration to Flash Window
© Copyright, 2004 Oki Network Technologies. All Rights Reserved | 61 |