BMG7011 and BMG7012 User’s Guide Rev. 1.9
2.Hardware Installation
2.1Front View (LEDs)
Figure 1 - The front panel of the BMG7011 and BMG7012 VoIP gateways
LED | Color | Status | Description | |
|
|
|
| |
PWR | Green | On | When the BMG7011 and BMG7012 VoIP gateways is powered on | |
Off | No power provided | |||
|
| |||
|
| Blinking | When data is being transmitted or received | |
WAN | Green | On | When WAN Link is established | |
|
| Off | When WAN Link is not established | |
|
| Blinking | When data is being transmitted or received | |
LAN | Green | On | When LAN Link is established | |
|
| Off | When LAN Link is not established | |
ONLINE | Green | On | When VoIP telephone service is ready | |
Off | When VoIP telephone service is not ready. Phone line is connected directly to PSTN | |||
|
| |||
LINE |
| Blinking | When there is an incoming call (the telephone is ringing) | |
Green | On | When the telephone is in use | ||
LINE1 & LINE2 | ||||
| Off | When telephone is not in use | ||
|
| |||
WAN/LAN/ONLINE | Green | All Blinking | Momentary blinking indicating gateway Reboot | |
ONLINE/LINE(s) | Green | All Blinking | Simultaneous blinking indicates Firmware upload in progress |
© Copyright, 2004 Oki Network Technologies. All Rights Reserved | 3 |