Emerson AMC-S402 manual Supported IPMI Commands, IPMI Function List

IPMI Function List

7.3Supported IPMI Commands

The MMC communicates with the carrier controller through the local IPMB-L bus of the carrier and responds to all mandatory commands for AMC Module Management Controllers (as defined in the AMC Specification), as well as some optional ones.

Table 15 Supported IPMI Commands

	IPMI/PICMG/
Command	AMC Spec	NetFn	CMD	MMC Req
IPM Device “Global” Commands
Get Device ID	17.1	App	01h	Mandatory
Broadcast “Get Device ID”	17.9	App	01h	Mandatory
Messaging Commands
Send Message	18.7	App	34h	Optional
Event Commands
Platform Event	23.3	S/E	02h	Mandatory
Sensor Device Commands
Get Device SDR Info	29.2	S/E	20h	Mandatory
Get Device SDR	29.3	S/E	21h	Mandatory
Reserve Device SDR Repository	29.4	S/E	22h	Mandatory
Get Sensor Reading Factors	29.5	S/E	23h	Optional
Set Sensor Hysteresis	29.6	S/E	24h	Optional
Get Sensor Hysteresis	29.7	S/E	25h	Optional
Set Sensor Threshold	29.8	S/E	26h	Optional
Get Sensor Threshold	29.9	S/E	27h	Optional
Set Sensor Event Enable	29.10	S/E	28h	Optional
Get Sensor Event Enable	29.11	S/E	29h	Optional
Rearm Sensor Events	29.12	S/E	2Ah	Optional
Get Sensor Event Status	29.13	S/E	2Bh	Optional
Get Sensor Reading	29.14	S/E	2Dh	Mandatory
FRU Device Commands
Get FRU Inventory Area Info	28.1	Storage	10h	Mandatory
Read FRU Data	28.2	Storage	11h	Mandatory
Write FRU Data	28.3	Storage	12h	Mandatory
ATCA™ Commands
Get PICMG Properties	3-9	PICMG	00h	Mandatory
FRU Control	3-22	PICMG	04h	Mandatory
Get FRU LED Properties	3-24	PICMG	05h	Mandatory
Get LED Color Capabilities	3-25	PICMG	06h	Mandatory
Set FRU LED State	3-26	PICMG	07h	Mandatory
Get FRU LED State	3-27	PICMG	08h	Mandatory
Get Device Locator Record ID	3-29	PICMG	0Dh	Mandatory

AMC® Commands

6806800H60A AMC-S402 Installation and Use 22