Unloading
5.0UNLOADING
The unit frame is bolted to the shipping pallet to ensure safety. Liebert recommends using a pallet jack to transport the unit to its operating location prior to unbolting the unit.
5.1Unloading the Maintenance Bypass Cabinet
! CAUTION
This Maintenance Bypass Cabinet is heavy (see weight in Table 2). At least two people should assist to unload it from the pallet.
1. Once the Maintenance Bypass Cabinet is near the desired operating location, remove the cardboard cover.
2. Use a 1/2" (13mm) wrench to remove the eight |
| |
mounting bolts (four per bracket) from the pallet |
| |
brackets. Remove mounting brackets from the pallet |
| |
and Maintenance Bypass Cabinet. Keep brackets and |
| |
bolts for future transportation of the Maintenance |
| |
Bypass Cabinet or for securing the cabinet to the | Mounting bolts | |
floor. | ||
in bracket | ||
|
3.Remove the metal ramp from the bottom of the pallet,
rotating it 180°. Fit ramp onto opposite side of pallet (in slot) as shown below.
Metal ramp
storage area
Ramp fitted
to pallet
4.Using two people, slowly roll the Maintenance Bypass Cabinet down the ramp until the Maintenance Bypass Cabinet is on a level surface (see below, left).
5.Once the Maintenance Bypass Cabinet is in the desired location, adjust the leveling feet to secure its position (see below, right).
Ease Maintenance Bypass Cabinet down ramp
Adjustable
leveling foot
Casters
10