Primera Technology C-1000P Rear Panel, Applying Power, Connecting the Printer to Your Computer

Page 10

Rear Panel

External Label

Feed Slot Cover

	115
I	O

Centronics

RS232

Power Slide Switch

Power Switch

Power Connector

The rear panel includes

•A Centronics-type parallel connector (36-pin)

•An RS-232 serial connector (9-pin)

•A Power Slide Switch

•A Power Switch and Power Connector

•An External Label Feed Slot with Cover

D. APPLYING POWER

1.Make sure that the Voltage Selector Switch is in the correct position for your local power (120 VAC or 220VAC).

2.Leave the Power Switch in the off (“O”) position.

3.Connect the Power Cord to the printer and the other end to your AC power source.

E.CONNECTING THE PRINTER TO YOUR COMPUTER

The printer is designed to be used with nearly any Windows- based PC. Operating systems supported are Windows 95/98/Me and Windows NT/2000. The printer is equipped with a standard 8-bit Centronics-type parallel port. This port is used to receive data from your computer. To connect the printer, obtain a shielded, bi-directional parallel cable. An IEEE1194-compliant cable, not longer than 5 feet (1.5m) is highly recommended. Then, follow these steps:

6 Getting Started

Image 10

Contents Cyclone Bar Code Label Printer Printing History Table of Contents Page Getting Started Thank YOU…Choosing a Good Location Unpacking and InspectionGetting Started Identifying the Parts LED IndicatorsFront Panel Buttons Connecting the Printer to Your Computer Applying PowerRear Panel Getting Started Parity Speed baud rateData format HandshakingLoading Media Loading Labels or TagsLoading Media Loading the Ribbon Loading Media Label Sensor Calibration Performing a Self TestResetting the Printer to Factory Default Condition Self Test PatternUsing the Printer With Windows Installing the Printer DriverDriver Installation HOW to USE the DriverParameter setting Details Print to the following portPaper source Using the Label Dr PaperOrientation Media choiceMore Options CopiesDevice Options Printing Labels Problems with media Troubleshooting & MaintenanceTroubleshooting ContinuousProblems with ribbon Other problemsRecovery Miscellaneous other problemsMaintenance Troubleshooting and Maintenance System Setting Commands Appendix a Command Language Quick ReferenceCommand SET for Ppla Command Description Parameter Factory defaultInteraction Commands Command Description Response ContentsSystem Level Commands Symbol Code hexadecimalFormatting Commands Command DescriptionEditing Commands CommandsDescriptionFont Downloading Commands Object String DescriptionCommand SET for Pplb Command Description ParameterLEx,y,hlen,vlen Command Language Quick Reference Serial Appendix B Interface SpecificationsIntroduction Connection with hostPrinter Terminal/Host Baud rateParallel Centronics Auto PollingAppendix C Ascii Table Font Appendix D Fonts and Bar Codes for PplaInternal Fonts FontFont Font Points Points Roman-8 ECMA-94PC-A PC-B LegalGreek Russian Internal Bar Codes Fonts and Bar Codes for Ppla Fonts and Bar Codes for Ppla Fonts and Bar Codes for Ppla Appendix E Fonts and Bar Codes for Pplb Symbol Set Fonts and Bar Codes for Pplb Fonts and Bar Codes for Pplb Internal Bar Codes Fonts and Bar Codes for Pplb Appendix F Specifications Printer SpecificationsSpecification Printer Programming Language A, PplaPrinter Programming Language B, Pplb Index