Primera Technology C-1000P manual Choosing a Good Location, Unpacking and Inspection

Page 6

A.CHOOSING A GOOD LOCATION

•Place the printer in a location with adequate air circulation to prevent internal heat build-up.

•Do not place the printer near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.

•Allow for adequate clearance in front of the printer to accommodate the labels coming out of the printer.

•Find a solid, flat surface with adequate room for the printer. Make sure there is enough room to open the side access door to change ribbons and media.

•The location should be as close as possible to your PC or terminal. Consider the distance between host and printer for the communication cable (serial or parallel cable).

Especially for parallel cable connections, it is important to keep the cable as short as possible.

•Be sure to connect the power cord to a properly grounded power receptacle.

B.UNPACKING AND INSPECTION

To unpack your printer:

•The container should stay right side up.

•Lift the printer out of the box carefully.

•Remove any accessory items.

•Set the printer on a solid, flat surface.

2 Getting Started

Image 6

Contents Cyclone Bar Code Label Printer Printing History Table of Contents Page Getting Started Thank YOU…Choosing a Good Location Unpacking and InspectionGetting Started LED Indicators Identifying the PartsFront Panel Buttons Applying Power Connecting the Printer to Your ComputerRear Panel Getting Started Parity Speed baud rateData format HandshakingLoading Media Loading Labels or TagsLoading Media Loading the Ribbon Loading Media Label Sensor Calibration Performing a Self TestResetting the Printer to Factory Default Condition Self Test PatternUsing the Printer With Windows Installing the Printer DriverDriver Installation HOW to USE the DriverParameter setting Details Print to the following portPaper source Using the Label Dr PaperOrientation Media choiceCopies More OptionsDevice Options Printing Labels Problems with media Troubleshooting & MaintenanceTroubleshooting ContinuousProblems with ribbon Other problemsMiscellaneous other problems RecoveryMaintenance Troubleshooting and Maintenance System Setting Commands Appendix a Command Language Quick ReferenceCommand SET for Ppla Command Description Parameter Factory defaultInteraction Commands Command Description Response ContentsSystem Level Commands Symbol Code hexadecimalFormatting Commands Command DescriptionEditing Commands CommandsDescriptionFont Downloading Commands Object String DescriptionCommand SET for Pplb Command Description ParameterLEx,y,hlen,vlen Command Language Quick Reference Serial Appendix B Interface SpecificationsIntroduction Connection with hostPrinter Terminal/Host Baud rateParallel Centronics Auto PollingAppendix C Ascii Table Font Appendix D Fonts and Bar Codes for PplaInternal Fonts FontFont Font Points Points Roman-8 ECMA-94PC-A PC-B LegalGreek Russian Internal Bar Codes Fonts and Bar Codes for Ppla Fonts and Bar Codes for Ppla Fonts and Bar Codes for Ppla Appendix E Fonts and Bar Codes for Pplb Symbol Set Fonts and Bar Codes for Pplb Fonts and Bar Codes for Pplb Internal Bar Codes Fonts and Bar Codes for Pplb Appendix F Specifications Printer SpecificationsSpecification Printer Programming Language A, PplaPrinter Programming Language B, Pplb Index