Buttons
There are three buttons on the panel; each of them has at least two basic functions.
|
| Press the button and |
| Under normal | turn on the power |
Button | condition | simultaneously |
FEED/ CONFIG. | Feeds a label. | Performs “self test” |
| and prints out the | |
|
| |
|
| configuration report. |
| 1. Stops the printing | Performs media |
PAUSE/ CALIBR. | process. | calibration. |
2.Resumes printing after button is pressed again.
CANCEL/ RESET
1. | Interrupts and | Resets the settings |
| deletes the current | at E2PROM. |
| print job. |
|
2. | Requests that the |
|
| printer start again |
|
| after an error has |
|
| been solved. |
|
Important It is highly suggested that you perform a media calibration
Note: using the Pause Button as described above:
-after the first installation of labels.
-after you change to a different type or size of media
(Before calibration, the media and ribbon should be loaded properly and the label sensor moved to the correct position).