3.Move the Label Supply Guide to the outside of the printer. This allows the maximum label width to be fed through the machine.
Label Supply Guide
Label
Supply
Spindle
Outside Label Guide
4.Load the label roll onto the Label Supply Spindle. Make sure the print side of the labels faces upwards when you pull it towards the print head module. Push the roll all the way to the inside of the printer and push the Label Supply Guide snugly against the outside of the label roll. See diagram above for loading labels and the diagram below for loading tags. If using
Label Supply Guide
Feed Slot
Label Supply Spindle
Outside Label Guide
5.Move the Outside Label Guide to the outside of the printer to hold the maximum label width.
6.Inspect the label routing and verify that the path matches the illustration in the Label Loading Diagram. Move the Outside Label Guide inwards to keep the labels against the inside of the printer.
7.Check the Sensor Adjust Knob. Make sure its position is under the gap path during printing. Adjust it inwards or outwards if necessary.