Primera Technology C-1000P manual Interaction Commands, Command Description Response Contents

(Table continued from previous page)

Command	Description	Parameter	Factory default
<STX>KI<m	Set symbol set	m: ‘0’ - USASCII,	0 for USASCII
	for ASD smooth	‘1’ - United
	font set	Kingdom,
		‘2’ - Spanish,
		‘3’ - Swedish,
		‘4’ - French,
		‘5’ - German,
		‘6’ - Italian,
		‘7’ - Danish/
		Norwegian.

Interaction Commands

These commands only apply to the serial port and allow the host to understand the status and configuration of the printer.

Command	Description	Response	Contents
<SOH>#	Reset	Y	<XOFF><XON>T
<SOH>A	Send a readable	Y	<8 bytes, Y/N> <CR>
	status string		byte 1 : Y - printer busy
			byte 2 : Y - paper out
			byte 3 : Y - ribbon out
			byte 4 : N (always)
			byte 5 : Y - printing
			byte 6 : Y - printer
			paused
			byte 7 : Y - label
			presented
			byte 8 : N (always)
<SOH>B	Toggle pause	N
	condition
<SOH>E	Send the	Y	e. g.
	number of		0000<CR>
	labels to be		no label left to be
	printed		printed
<SOH>F	Send status byte	Y	n<CR>
			same as <SOH>A,
			except bit 1 ~ 8 are
			corresponding to byte
			1 ~ 8 of <SOH>A.

26 Command Language Quick Reference