Self Test Pattern
E.RESETTING THE PRINTER TO FACTORY DEFAULT CONDITION
If you would like to reset the printer to its factory defaults condition after certain commands have been sent or settings changed:
1.Turn off the printer. Press and hold the CANCEL button.
2.Turn on the power.
3.The READY LED indicator will blink for few seconds, then release the button.
4.The READY LED indicator will stop blinking and stays lit.
5.The following parameters automatically reset.
-Label parameters
-Heat (Darkness)
-Speed
-Symbol set (language)
-Others various emulation settings
Notes: 1. It is necessary to perform label sensor calibration after resetting. 2. The printed label count won’t be reset.