Lanier 5613 manual Starting the Machine, Shutting Down the Machine, Turning Off the Main Power

Page 20

Basics

Starting the Machine

A Press the operation switch to make the On indicator go on.

1	The display panel will come on.

Note

❒If the power is not turned on when the operation switch is pressed, check if the main power switch is on. If off, turn it on.

❒During the warm-up period (less than 20 seconds), you can use the Auto Start function. See p.31 “Auto Start”.

❒You can set up a copy job and press the {Start} key while the “Select Modes and Press Start” message is displayed.

❒When “Input User Code and Press OK” is displayed, enter your user code.

Shutting Down the Machine

A Press the operation switch to make the On indicator go off and change to Low Power mode.

Turning Off the Main Power

A Turn off the main power switch.

The main power indicator of the control panel goes off.

Important

❒Fax files stored in memory will be lost 12 hours after you turn the main power switch off or you unplug the power cord.

8

Image 20

Contents 5613 Means Power ON. c means Stand by Safety Information Safety During OperationPage Positions of Labels and Hallmarks for Rwarning and Rcaution How to Read this Manual SymbolsMachine Types What You Can Do with This Machine Table of Contents Troubleshooting Specifications Page Guide to Components On indicator Operation switchControl panel Bypass trayOptions Paper tray unitCopier only Fax and/or printer installed Control PanelFax function keys Fax installed machine only Dial Function keys Fax in- stalled machine onlyPrinter function keys Printer in- stalled machine only Number keysPanel Display Displays and Key OperationsCopy display Common keysTurning On the Power Turning On the Main PowerOperation switch right side of the control panel Main power switch left side of the machineTurning Off the Main Power Press the operation switch to make the On indicator go onTurn off the main power switch Starting the MachineChanging Modes Originals Metric versionInch version Non-recommended originals for the document feeder ADFOriginal Sizes and Scanning Area/Missing Image Area Exposure glass Document feeder ADFCopy Paper Recommended Paper Sizes and TypesNon-recommended Paper Paper Storage Used Toner TonerToner Storage Basics Basic Procedure Make sure that the machine is in Copy modePlace your originals Press the Start keyAuto Off Placing Originals Placing Originals on Exposure GlassLimit mark Document guide Loading Originals Document Feeder ADFPlacing Standard Size Originals Placing Custom Size Originals You can also enter this mode by pressing the R/# key Basic Functions Selecting an Original TypeText PhotoSelecting Copy Paper Sort SortSort Enter the number of copy sets with the number keys After all originals are scanned, press the R/# keyCopying from the Bypass Tray When copying onto OHP transparencies Push down the paper guide re- lease leverPress the R/# key When copying onto standard size paperWhen copying onto custom size copy paper When copying onto envelopes Setting the User Code Other FunctionsUser Codes Auto StartPress the OK key Preset Reduce/EnlargePress the Reduce/Enlarge key Place your originals, and then press the Start key Zoom Press the Zoom key Enter the ratioEnter the desired reproduction ratios with the 0 or 1 key Enter the desired ratio with the number keysLandscape L originals CombinePortrait K originals Select with the 0 or 1 key, and then press the OK key Load your originals, and then press the Start keyCombination Chart Following shows the combinations of functionsCopying Display Machine Operation ProblemsGeneral Cannot Make Clear Copies Cannot Make Desired Copies CombinePush the paper tray in until it stops HLoading PaperLoading paper in the optional paper tray unit Readjust the back fence and side fences HChanging the Toner Cartridge Regarding toner storage, see p.15 Toner StorageHChanging the Toner Cartridge HClearing Misfeeds HClearing Misfeeds Changing the Paper Size in the Paper Tray Adjust the back fenceChanging the Paper Size Adjust the side and back fences to the new paper size Square the paper and load it in the trayPush the paper tray in until it stops When you have selected Custom Size on step E Selecting the Paper Size with the User ToolsTroubleshooting User Tools Copier Features Accessing the User Tools Copier FeaturesExiting the User Tools User Tools Menu Copier Features Settings You Can Change with the User Tools Copier FeaturesMenu Description User Tools Copier Features Remarks Dos and DontsWhere to Put Your Machine Machine EnvironmentOptimum environmental conditions Environments to avoidPower Connection Access to Machine Cleaning the machine Maintaining Your MachineRemarks Mainframe Copy paper weight Non-reproduction areaFirst copy time Copying speedPower consumption Dimensions W ⋅ D ⋅ H up to exposure glassWeight Noise Emission *1Document Feeder ADF Option for Type Paper capacity Paper Tray Unit OptionAvailable paper size 32MB Copier Memory Unit Option Memory capacityAdditional functions Number of originals that can be stored about 99 pagesIndex Toner User Codes, 31 User Tools Ventilation hole Zoom Memo UE USA B045