Lanier 5613 manual Menu Description

Page 69

		Settings You Can Change with the User Tools

Menu	Description

3. Set Ratio	Select which Reduce, Enlarge or Input Ratio is shown on the panel
	display with priority when the {Reduce/Enlarge} key is pressed.
	Note
	❒ Default:
	• Ratio 1: 65% 81/2" ⋅ 11"→51/2" ⋅ 81/2"
	• Ratio 2: 78% 81/2" ⋅ 14"→81/2" ⋅ 11"
	•	Ratio 3: 93%
	• Ratio 4: 129% 51/2" ⋅ 81/2"→81/2" ⋅ 11"
	• Ratio 5: 155% 51/2" ⋅ 81/2"→81/2" ⋅ 14"

4. Copy Reset Timer	The machine returns to its initial condition automatically after
	your job is finished. When you set the time, select “1. On/Off” to
	“On” and then set the “2. Timer” to the desired time. The time can
	be selected from 10 to 999 seconds.
	Note
	❒ Default:
	•	1. On/Off: On
	• 2. Timer: 60 sec.

5. Orig. Orientation	You can select the orientation of originals with Combine mode.
	Note
	❒ Default: Off

6. Bypass Paper Type	You can select the type of paper for the bypass tray.
	Note
	❒ Default: Thick

7. Key Op. Tools	If the machine is set to use the User Code function, operators must
	enter their user codes before the machine can operate.
	The machine can keep count of the number of copies made under
	each user code.

1. User Code Access	Specify whether to employ user codes to restrict copier users, and
	manage the number of copies made.
	Note
	❒ Default: Off

2. Check Copy Counter	You can check the number of copies made under each user code.

3. Print Counter List	You can print counter lists.

4. Reset Counter	You can check the number of copies made under each user code.
	You can also reset each user code's counter to 0.

4

57

Image 69

Contents 5613 Means Power ON. c means Stand by Safety During Operation Safety InformationPage Positions of Labels and Hallmarks for Rwarning and Rcaution Symbols How to Read this ManualMachine Types What You Can Do with This Machine Table of Contents Troubleshooting Specifications Page Guide to Components Operation switch On indicatorControl panel Bypass trayPaper tray unit OptionsControl Panel Copier only Fax and/or printer installedDial Function keys Fax in- stalled machine only Fax function keys Fax installed machine onlyPrinter function keys Printer in- stalled machine only Number keysDisplays and Key Operations Panel DisplayCopy display Common keysTurning On the Main Power Turning On the PowerOperation switch right side of the control panel Main power switch left side of the machinePress the operation switch to make the On indicator go on Turning Off the Main PowerTurn off the main power switch Starting the MachineChanging Modes Metric version OriginalsInch version Non-recommended originals for the document feeder ADFExposure glass Document feeder ADF Original Sizes and Scanning Area/Missing Image AreaRecommended Paper Sizes and Types Copy PaperNon-recommended Paper Paper Storage Toner Toner StorageUsed Toner Basics Make sure that the machine is in Copy mode Basic ProcedurePlace your originals Press the Start keyAuto Off Placing Originals on Exposure Glass Placing OriginalsLoading Originals Document Feeder ADF Placing Standard Size OriginalsLimit mark Document guide Placing Custom Size Originals You can also enter this mode by pressing the R/# key Selecting an Original Type Basic FunctionsText PhotoSelecting Copy Paper Sort SortSort After all originals are scanned, press the R/# key Enter the number of copy sets with the number keysCopying from the Bypass Tray Push down the paper guide re- lease lever When copying onto OHP transparenciesWhen copying onto standard size paper When copying onto custom size copy paperPress the R/# key When copying onto envelopes Other Functions Setting the User CodeUser Codes Auto StartPreset Reduce/Enlarge Press the Reduce/Enlarge keyPress the OK key Place your originals, and then press the Start key Press the Zoom key Enter the ratio ZoomEnter the desired reproduction ratios with the 0 or 1 key Enter the desired ratio with the number keysCombine Portrait K originalsLandscape L originals Load your originals, and then press the Start key Select with the 0 or 1 key, and then press the OK keyFollowing shows the combinations of functions Combination ChartCopying Machine Operation Problems GeneralDisplay Cannot Make Clear Copies Combine Cannot Make Desired CopiesHLoading Paper Loading paper in the optional paper tray unitPush the paper tray in until it stops Readjust the back fence and side fences Regarding toner storage, see p.15 Toner Storage HChanging the Toner CartridgeHChanging the Toner Cartridge HClearing Misfeeds HClearing Misfeeds Adjust the back fence Changing the Paper SizeChanging the Paper Size in the Paper Tray Square the paper and load it in the tray Adjust the side and back fences to the new paper sizePush the paper tray in until it stops Selecting the Paper Size with the User Tools When you have selected Custom Size on step ETroubleshooting Accessing the User Tools Copier Features User Tools Copier FeaturesExiting the User Tools User Tools Menu Copier Features Copier Features Settings You Can Change with the User ToolsMenu Description User Tools Copier Features Dos and Donts RemarksMachine Environment Where to Put Your MachineOptimum environmental conditions Environments to avoidPower Connection Access to Machine Maintaining Your Machine Cleaning the machineRemarks Mainframe Non-reproduction area Copy paper weightFirst copy time Copying speedDimensions W ⋅ D ⋅ H up to exposure glass Power consumptionWeight Noise Emission *1Document Feeder ADF Option for Type Paper Tray Unit Option Available paper sizePaper capacity Memory capacity 32MB Copier Memory Unit OptionAdditional functions Number of originals that can be stored about 99 pagesIndex Toner User Codes, 31 User Tools Ventilation hole Zoom Memo UE USA B045