Lanier 5613 Basic Procedure, Make sure that the machine is in Copy mode, Place your originals

Page 29

2. Copying

Basic Procedure

A Make sure that the machine is in Copy mode.

Note

❒If not, press the {Copy} key.

B If the machine is set for User Code, enter the code with the number keys, and then press the {OK} key. See p.31 “User Codes”.

C Make sure that there are no previ- ous settings remaining.

Note

❒To clear settings, press the

{Clear Modes} key.

D Place your originals.

Reference

See p.19 “Placing Originals”.

E Make the desired settings.

F Enter the number of copies re- quired with the number keys.

Note

❒The maximum copy quantity can be set between 1 and 99 (de- fault: 99). See “1. Max. Copy Q'ty” in p.56 “Copier Features”.

❒To change the number entered, press the {Clear/Stop} key, and then enter the new number.

G Press the {Start} key.

The machine starts copying.

Note

❒To stop the machine during the

multi -copy run, press the

{Clear/Stop} key.

❒To return the machine to the ini-

tial condition after copying, press the {Clear Modes} key.

-System Reset

The machine returns to its prioritized mode automatically after your job is finished, after a certain period of time. This function is called “System Reset”.

Note

❒You can change the System Reset time. See “3. System Reset” in the System Settings manual.

17

Image 29

Contents 5613 Means Power ON. c means Stand by Safety During Operation Safety InformationPage Positions of Labels and Hallmarks for Rwarning and Rcaution Symbols How to Read this ManualMachine Types What You Can Do with This Machine Table of Contents Troubleshooting Specifications Page Guide to Components Operation switch On indicatorControl panel Bypass trayPaper tray unit OptionsControl Panel Copier only Fax and/or printer installedDial Function keys Fax in- stalled machine only Fax function keys Fax installed machine onlyPrinter function keys Printer in- stalled machine only Number keysDisplays and Key Operations Panel DisplayCopy display Common keysTurning On the Main Power Turning On the PowerOperation switch right side of the control panel Main power switch left side of the machinePress the operation switch to make the On indicator go on Turning Off the Main PowerTurn off the main power switch Starting the MachineChanging Modes Metric version OriginalsInch version Non-recommended originals for the document feeder ADFExposure glass Document feeder ADF Original Sizes and Scanning Area/Missing Image AreaRecommended Paper Sizes and Types Copy PaperNon-recommended Paper Paper Storage Used Toner TonerToner Storage Basics Make sure that the machine is in Copy mode Basic ProcedurePlace your originals Press the Start keyAuto Off Placing Originals on Exposure Glass Placing OriginalsLimit mark Document guide Loading Originals Document Feeder ADFPlacing Standard Size Originals Placing Custom Size Originals You can also enter this mode by pressing the R/# key Selecting an Original Type Basic FunctionsText PhotoSelecting Copy Paper Sort SortSort After all originals are scanned, press the R/# key Enter the number of copy sets with the number keysCopying from the Bypass Tray Push down the paper guide re- lease lever When copying onto OHP transparenciesPress the R/# key When copying onto standard size paperWhen copying onto custom size copy paper When copying onto envelopes Other Functions Setting the User CodeUser Codes Auto StartPress the OK key Preset Reduce/EnlargePress the Reduce/Enlarge key Place your originals, and then press the Start key Press the Zoom key Enter the ratio ZoomEnter the desired reproduction ratios with the 0 or 1 key Enter the desired ratio with the number keysLandscape L originals CombinePortrait K originals Load your originals, and then press the Start key Select with the 0 or 1 key, and then press the OK keyFollowing shows the combinations of functions Combination ChartCopying Display Machine Operation ProblemsGeneral Cannot Make Clear Copies Combine Cannot Make Desired CopiesPush the paper tray in until it stops HLoading PaperLoading paper in the optional paper tray unit Readjust the back fence and side fences Regarding toner storage, see p.15 Toner Storage HChanging the Toner CartridgeHChanging the Toner Cartridge HClearing Misfeeds HClearing Misfeeds Changing the Paper Size in the Paper Tray Adjust the back fenceChanging the Paper Size Square the paper and load it in the tray Adjust the side and back fences to the new paper sizePush the paper tray in until it stops Selecting the Paper Size with the User Tools When you have selected Custom Size on step ETroubleshooting Accessing the User Tools Copier Features User Tools Copier FeaturesExiting the User Tools User Tools Menu Copier Features Copier Features Settings You Can Change with the User ToolsMenu Description User Tools Copier Features Dos and Donts RemarksMachine Environment Where to Put Your MachineOptimum environmental conditions Environments to avoidPower Connection Access to Machine Maintaining Your Machine Cleaning the machineRemarks Mainframe Non-reproduction area Copy paper weightFirst copy time Copying speedDimensions W ⋅ D ⋅ H up to exposure glass Power consumptionWeight Noise Emission *1Document Feeder ADF Option for Type Paper capacity Paper Tray Unit OptionAvailable paper size Memory capacity 32MB Copier Memory Unit OptionAdditional functions Number of originals that can be stored about 99 pagesIndex Toner User Codes, 31 User Tools Ventilation hole Zoom Memo UE USA B045