Lanier 5613 manual Paper Storage

Page 26

Basics

Note

Do not use any of the following kinds of paper or a misfeed might occur.

Bent, folded, or creased paper

1• Damp paper

Torn paper

Slippery paper

Perforated paper

Rough paper

Thin paper that has low stiffness

Paper with much paper dust on its surface

If you make copies on rough grain paper, the copy image might be blurred.

Do not use envelopes in the following conditions.

damp

excessively curled or twisted

stuck together

damaged in any way

with stamps attached

with windows, holes, perforations, cutouts or embossing

with metal clasps, string ties or metal folding bars

designed to be interlocked

with nicked edges or bent corners

with rough, wrinkled or laid finishes

with any exposed adhesive, when the flap is in the sealed or closed posi- tion

Paper Storage

Note

When storing paper, the following precautions should always be followed:

Do not store paper where it will be exposed to direct sunlight.

Avoid storing paper in humid areas (humidity: 70% or less).

Store on a flat surface.

Keep open reams of paper in the package, and store as you would unopened paper.

Under high temperature and high humidity, or low temperature and low hu- midity conditions, store paper in a plastic bag.

14

Image 26
Contents 5613 Means Power ON. c means Stand by Safety Information Safety During OperationPage Positions of Labels and Hallmarks for Rwarning and Rcaution How to Read this Manual SymbolsMachine Types What You Can Do with This Machine Table of Contents Troubleshooting Specifications Page Guide to Components Control panel On indicatorOperation switch Bypass trayOptions Paper tray unitCopier only Fax and/or printer installed Control PanelPrinter function keys Printer in- stalled machine only Fax function keys Fax installed machine onlyDial Function keys Fax in- stalled machine only Number keysCopy display Panel DisplayDisplays and Key Operations Common keysOperation switch right side of the control panel Turning On the PowerTurning On the Main Power Main power switch left side of the machineTurn off the main power switch Turning Off the Main PowerPress the operation switch to make the On indicator go on Starting the MachineChanging Modes Inch version OriginalsMetric version Non-recommended originals for the document feeder ADFOriginal Sizes and Scanning Area/Missing Image Area Exposure glass Document feeder ADFCopy Paper Recommended Paper Sizes and TypesNon-recommended Paper Paper Storage Used Toner TonerToner Storage Basics Place your originals Basic ProcedureMake sure that the machine is in Copy mode Press the Start keyAuto Off Placing Originals Placing Originals on Exposure GlassLimit mark Document guide Loading Originals Document Feeder ADFPlacing Standard Size Originals Placing Custom Size Originals You can also enter this mode by pressing the R/# key Text Basic FunctionsSelecting an Original Type PhotoSelecting Copy Paper Sort SortSort Enter the number of copy sets with the number keys After all originals are scanned, press the R/# keyCopying from the Bypass Tray When copying onto OHP transparencies Push down the paper guide re- lease leverPress the R/# key When copying onto standard size paperWhen copying onto custom size copy paper When copying onto envelopes User Codes Setting the User CodeOther Functions Auto StartPress the OK key Preset Reduce/EnlargePress the Reduce/Enlarge key Place your originals, and then press the Start key Enter the desired reproduction ratios with the 0 or 1 key ZoomPress the Zoom key Enter the ratio Enter the desired ratio with the number keysLandscape L originals CombinePortrait K originals Select with the 0 or 1 key, and then press the OK key Load your originals, and then press the Start keyCombination Chart Following shows the combinations of functionsCopying Display Machine Operation ProblemsGeneral Cannot Make Clear Copies Cannot Make Desired Copies CombinePush the paper tray in until it stops HLoading PaperLoading paper in the optional paper tray unit Readjust the back fence and side fences HChanging the Toner Cartridge Regarding toner storage, see p.15 Toner StorageHChanging the Toner Cartridge HClearing Misfeeds HClearing Misfeeds Changing the Paper Size in the Paper Tray Adjust the back fenceChanging the Paper Size Adjust the side and back fences to the new paper size Square the paper and load it in the trayPush the paper tray in until it stops When you have selected Custom Size on step E Selecting the Paper Size with the User ToolsTroubleshooting User Tools Copier Features Accessing the User Tools Copier FeaturesExiting the User Tools User Tools Menu Copier Features Settings You Can Change with the User Tools Copier FeaturesMenu Description User Tools Copier Features Remarks Dos and DontsOptimum environmental conditions Where to Put Your MachineMachine Environment Environments to avoidPower Connection Access to Machine Cleaning the machine Maintaining Your MachineRemarks Mainframe First copy time Copy paper weightNon-reproduction area Copying speedWeight Power consumptionDimensions W ⋅ D ⋅ H up to exposure glass Noise Emission *1Document Feeder ADF Option for Type Paper capacity Paper Tray Unit OptionAvailable paper size Additional functions 32MB Copier Memory Unit OptionMemory capacity Number of originals that can be stored about 99 pagesIndex Toner User Codes, 31 User Tools Ventilation hole Zoom Memo UE USA B045