Lanier 5613 manual Basic Functions, Selecting an Original Type, Text, Photo

Page 35

Basic Functions

Basic Functions

Note

❒You can select functions to be acti- vated when System Reset is turned on, when Energy Saver is turned off, or after the machine is pow- ered on. See p.56 “Settings You Can Change with the User Tools”.

❒You can change default settings for basic functions. See p.56 “Settings You Can Change with the User Tools”.

Adjusting Copy Image Density

You can adjust the copy image densi- ty to match your originals.

If you require darker or lighter cop- ies, adjust the image density yourself.

A Press the {Lighter} or {Darker} key to adjust the image density.

Selecting an Original Type

There are two ways to match your originals:

2

❖Text

If you do not select either mode, your originals will be scanned with the settings suitable for text originals with this mode.

❖Photo

Delicate tones of photographs and pictures can be reproduced with this mode.

Note

❒You can change the detailed set- tings for Text and Photo each with the User Tools. See p.56 “Settings You Can Change with the User Tools”.

A Press the {Original} key, and then select the original type.

Note

❒Press the {Original} key to step through the following types:

Upper indicator lit	Text

Lower indicator lit	Photo

23

Image 35

Contents 5613 Means Power ON. c means Stand by Safety During Operation Safety InformationPage Positions of Labels and Hallmarks for Rwarning and Rcaution Symbols How to Read this ManualMachine Types What You Can Do with This Machine Table of Contents Troubleshooting Specifications Page Guide to Components Bypass tray On indicatorOperation switch Control panelPaper tray unit OptionsControl Panel Copier only Fax and/or printer installedNumber keys Fax function keys Fax installed machine onlyDial Function keys Fax in- stalled machine only Printer function keys Printer in- stalled machine onlyCommon keys Panel DisplayDisplays and Key Operations Copy displayMain power switch left side of the machine Turning On the PowerTurning On the Main Power Operation switch right side of the control panelStarting the Machine Turning Off the Main PowerPress the operation switch to make the On indicator go on Turn off the main power switchChanging Modes Non-recommended originals for the document feeder ADF OriginalsMetric version Inch versionExposure glass Document feeder ADF Original Sizes and Scanning Area/Missing Image AreaRecommended Paper Sizes and Types Copy PaperNon-recommended Paper Paper Storage Used Toner TonerToner Storage Basics Press the Start key Basic ProcedureMake sure that the machine is in Copy mode Place your originalsAuto Off Placing Originals on Exposure Glass Placing OriginalsLimit mark Document guide Loading Originals Document Feeder ADFPlacing Standard Size Originals Placing Custom Size Originals You can also enter this mode by pressing the R/# key Photo Basic FunctionsSelecting an Original Type TextSelecting Copy Paper Sort SortSort After all originals are scanned, press the R/# key Enter the number of copy sets with the number keysCopying from the Bypass Tray Push down the paper guide re- lease lever When copying onto OHP transparenciesPress the R/# key When copying onto standard size paperWhen copying onto custom size copy paper When copying onto envelopes Auto Start Setting the User CodeOther Functions User CodesPress the OK key Preset Reduce/EnlargePress the Reduce/Enlarge key Place your originals, and then press the Start key Enter the desired ratio with the number keys ZoomPress the Zoom key Enter the ratio Enter the desired reproduction ratios with the 0 or 1 keyLandscape L originals CombinePortrait K originals Load your originals, and then press the Start key Select with the 0 or 1 key, and then press the OK keyFollowing shows the combinations of functions Combination ChartCopying Display Machine Operation ProblemsGeneral Cannot Make Clear Copies Combine Cannot Make Desired CopiesPush the paper tray in until it stops HLoading PaperLoading paper in the optional paper tray unit Readjust the back fence and side fences Regarding toner storage, see p.15 Toner Storage HChanging the Toner CartridgeHChanging the Toner Cartridge HClearing Misfeeds HClearing Misfeeds Changing the Paper Size in the Paper Tray Adjust the back fenceChanging the Paper Size Square the paper and load it in the tray Adjust the side and back fences to the new paper sizePush the paper tray in until it stops Selecting the Paper Size with the User Tools When you have selected Custom Size on step ETroubleshooting Accessing the User Tools Copier Features User Tools Copier FeaturesExiting the User Tools User Tools Menu Copier Features Copier Features Settings You Can Change with the User ToolsMenu Description User Tools Copier Features Dos and Donts RemarksEnvironments to avoid Where to Put Your MachineMachine Environment Optimum environmental conditionsPower Connection Access to Machine Maintaining Your Machine Cleaning the machineRemarks Mainframe Copying speed Copy paper weightNon-reproduction area First copy timeNoise Emission *1 Power consumptionDimensions W ⋅ D ⋅ H up to exposure glass WeightDocument Feeder ADF Option for Type Paper capacity Paper Tray Unit OptionAvailable paper size Number of originals that can be stored about 99 pages 32MB Copier Memory Unit OptionMemory capacity Additional functionsIndex Toner User Codes, 31 User Tools Ventilation hole Zoom Memo UE USA B045