Lanier 5613 manual Copy paper weight, Non-reproduction area, First copy time, Copying speed

Page 78

Specifications

• Bypass tray (custom size): Vertical: 90 – 216mm, 3.5" – 8.5" Horizontal: 140 – 356mm, 5.5" – 14"

• Paper tray unit: A4L, 81/2" ⋅ 14"L, 81/2" ⋅ 13"L, 81/4" ⋅ 14"L, 81/4" ⋅ 13"L, 81/2" ⋅ 11"L

Copy paper weight:

• Paper tray (Standard size): 60 – 90g/m2 (16 – 24 lb.)

• Bypass tray: 60 – 157g/m2 (16 – 42 lb.)

• Paper tray unit: 60 – 90g/m2 (16 – 24 lb.)

Non-reproduction area:

 

• Leading edge: 3 ± 2mm, 0.14" ± 0.08"

 

• Trailing edge: 3 ± 2mm, , 0.14" ± 0.08"

 

• Left edge: 2 ± 1.5mm, , 0.08" ± 0.07"

 

• Right edge: more than 0.5mm, 0.02"

 

First copy time:

 

8 seconds or less

6

(A4L, 81/2" ⋅ 11"L 100%, placing an original on the exposure glass, feeding

from the paper tray)

Copying speed:

13 copies/minute (A4L, 81/2" ⋅ 11"L, feeding from the paper tray or the optional paper tray unit)

Reproduction ratio:

Preset reproduction ratios:

--

 

Metric version

Inch version

 

 

 

 

Enlargement

200%

155%

 

 

 

 

 

 

141%

129%

 

 

 

Full Size

100%

100%

 

 

 

Reduction

93%

93%

 

 

 

 

 

 

71%

78%

 

 

 

 

 

 

50%

65%

 

 

 

 

Zoom: from 50% to 200% in 1% step.

Continuous copying count:

1– 99 copies

Copy paper capacity:

250sheets (80g/m2, 20 lb)

66

Image 78
Contents 5613 Means Power ON. c means Stand by Safety Information Safety During OperationPage Positions of Labels and Hallmarks for Rwarning and Rcaution How to Read this Manual SymbolsMachine Types What You Can Do with This Machine Table of Contents Troubleshooting Specifications Page Guide to Components Control panel On indicatorOperation switch Bypass trayOptions Paper tray unitCopier only Fax and/or printer installed Control PanelPrinter function keys Printer in- stalled machine only Fax function keys Fax installed machine onlyDial Function keys Fax in- stalled machine only Number keysCopy display Panel DisplayDisplays and Key Operations Common keysOperation switch right side of the control panel Turning On the PowerTurning On the Main Power Main power switch left side of the machineTurn off the main power switch Turning Off the Main PowerPress the operation switch to make the On indicator go on Starting the MachineChanging Modes Inch version OriginalsMetric version Non-recommended originals for the document feeder ADFOriginal Sizes and Scanning Area/Missing Image Area Exposure glass Document feeder ADFCopy Paper Recommended Paper Sizes and TypesNon-recommended Paper Paper Storage Toner Toner StorageUsed Toner Basics Place your originals Basic ProcedureMake sure that the machine is in Copy mode Press the Start keyAuto Off Placing Originals Placing Originals on Exposure GlassLoading Originals Document Feeder ADF Placing Standard Size OriginalsLimit mark Document guide Placing Custom Size Originals You can also enter this mode by pressing the R/# key Text Basic FunctionsSelecting an Original Type PhotoSelecting Copy Paper Sort SortSort Enter the number of copy sets with the number keys After all originals are scanned, press the R/# keyCopying from the Bypass Tray When copying onto OHP transparencies Push down the paper guide re- lease leverWhen copying onto standard size paper When copying onto custom size copy paperPress the R/# key When copying onto envelopes User Codes Setting the User CodeOther Functions Auto StartPreset Reduce/Enlarge Press the Reduce/Enlarge keyPress the OK key Place your originals, and then press the Start key Enter the desired reproduction ratios with the 0 or 1 key ZoomPress the Zoom key Enter the ratio Enter the desired ratio with the number keysCombine Portrait K originalsLandscape L originals Select with the 0 or 1 key, and then press the OK key Load your originals, and then press the Start keyCombination Chart Following shows the combinations of functionsCopying Machine Operation Problems GeneralDisplay Cannot Make Clear Copies Cannot Make Desired Copies CombineHLoading Paper Loading paper in the optional paper tray unitPush the paper tray in until it stops Readjust the back fence and side fences HChanging the Toner Cartridge Regarding toner storage, see p.15 Toner StorageHChanging the Toner Cartridge HClearing Misfeeds HClearing Misfeeds Adjust the back fence Changing the Paper SizeChanging the Paper Size in the Paper Tray Adjust the side and back fences to the new paper size Square the paper and load it in the trayPush the paper tray in until it stops When you have selected Custom Size on step E Selecting the Paper Size with the User ToolsTroubleshooting User Tools Copier Features Accessing the User Tools Copier FeaturesExiting the User Tools User Tools Menu Copier Features Settings You Can Change with the User Tools Copier FeaturesMenu Description User Tools Copier Features Remarks Dos and DontsOptimum environmental conditions Where to Put Your MachineMachine Environment Environments to avoidPower Connection Access to Machine Cleaning the machine Maintaining Your MachineRemarks Mainframe First copy time Copy paper weightNon-reproduction area Copying speedWeight Power consumptionDimensions W ⋅ D ⋅ H up to exposure glass Noise Emission *1Document Feeder ADF Option for Type Paper Tray Unit Option Available paper sizePaper capacity Additional functions 32MB Copier Memory Unit OptionMemory capacity Number of originals that can be stored about 99 pagesIndex Toner User Codes, 31 User Tools Ventilation hole Zoom Memo UE USA B045