Lanier 5613 manual Enter the number of copy sets with the number keys

Page 38

Copying

D Enter the number of copy sets with the number keys.

Note

❒The maximum number of sets is 99. You can change the default number with “1. Max. Copy

2	Q'ty” in the copier features. See
	p.56 “Settings You Can Change

with the User Tools”.

❒To change the number entered, press the {Clear/Stop} key and enter the new number.

E Place your originals.

When loading originals in the document feeder (ADF)

A Load your originals in the doc- ument feeder (ADF), and then press the {Start} key.

Note

❒The last page should be on the bottom.

❒If an original is misfed, place your originals in the docu- ment feeder (ADF) again ac- cording to the instruction on the display.

When placing an original on the exposure glass

A Place the original, and then press the {Start} key.

B Place the next original, and then press the {Start} key.

Note

❒Place the original in the same direction as the first one.

C After all originals are scanned, press the {R/#} key.

The copies are delivered to the tray.

26

Image 38

Contents 5613 Means Power ON. c means Stand by Safety Information Safety During OperationPage Positions of Labels and Hallmarks for Rwarning and Rcaution How to Read this Manual SymbolsMachine Types What You Can Do with This Machine Table of Contents Troubleshooting Specifications Page Guide to Components Control panel On indicatorOperation switch Bypass trayOptions Paper tray unitCopier only Fax and/or printer installed Control PanelPrinter function keys Printer in- stalled machine only Fax function keys Fax installed machine onlyDial Function keys Fax in- stalled machine only Number keysCopy display Panel DisplayDisplays and Key Operations Common keysOperation switch right side of the control panel Turning On the PowerTurning On the Main Power Main power switch left side of the machineTurn off the main power switch Turning Off the Main PowerPress the operation switch to make the On indicator go on Starting the MachineChanging Modes Inch version OriginalsMetric version Non-recommended originals for the document feeder ADFOriginal Sizes and Scanning Area/Missing Image Area Exposure glass Document feeder ADFCopy Paper Recommended Paper Sizes and TypesNon-recommended Paper Paper Storage Used Toner TonerToner Storage Basics Place your originals Basic ProcedureMake sure that the machine is in Copy mode Press the Start keyAuto Off Placing Originals Placing Originals on Exposure GlassLimit mark Document guide Loading Originals Document Feeder ADFPlacing Standard Size Originals Placing Custom Size Originals You can also enter this mode by pressing the R/# key Text Basic FunctionsSelecting an Original Type PhotoSelecting Copy Paper Sort SortSort Enter the number of copy sets with the number keys After all originals are scanned, press the R/# keyCopying from the Bypass Tray When copying onto OHP transparencies Push down the paper guide re- lease leverPress the R/# key When copying onto standard size paperWhen copying onto custom size copy paper When copying onto envelopes User Codes Setting the User CodeOther Functions Auto StartPress the OK key Preset Reduce/EnlargePress the Reduce/Enlarge key Place your originals, and then press the Start key Enter the desired reproduction ratios with the 0 or 1 key ZoomPress the Zoom key Enter the ratio Enter the desired ratio with the number keysLandscape L originals CombinePortrait K originals Select with the 0 or 1 key, and then press the OK key Load your originals, and then press the Start keyCombination Chart Following shows the combinations of functionsCopying Display Machine Operation ProblemsGeneral Cannot Make Clear Copies Cannot Make Desired Copies CombinePush the paper tray in until it stops HLoading PaperLoading paper in the optional paper tray unit Readjust the back fence and side fences HChanging the Toner Cartridge Regarding toner storage, see p.15 Toner StorageHChanging the Toner Cartridge HClearing Misfeeds HClearing Misfeeds Changing the Paper Size in the Paper Tray Adjust the back fenceChanging the Paper Size Adjust the side and back fences to the new paper size Square the paper and load it in the trayPush the paper tray in until it stops When you have selected Custom Size on step E Selecting the Paper Size with the User ToolsTroubleshooting User Tools Copier Features Accessing the User Tools Copier FeaturesExiting the User Tools User Tools Menu Copier Features Settings You Can Change with the User Tools Copier FeaturesMenu Description User Tools Copier Features Remarks Dos and DontsOptimum environmental conditions Where to Put Your MachineMachine Environment Environments to avoidPower Connection Access to Machine Cleaning the machine Maintaining Your MachineRemarks Mainframe First copy time Copy paper weightNon-reproduction area Copying speedWeight Power consumptionDimensions W ⋅ D ⋅ H up to exposure glass Noise Emission *1Document Feeder ADF Option for Type Paper capacity Paper Tray Unit OptionAvailable paper size Additional functions 32MB Copier Memory Unit OptionMemory capacity Number of originals that can be stored about 99 pagesIndex Toner User Codes, 31 User Tools Ventilation hole Zoom Memo UE USA B045