Lanier 5613 manual When copying onto OHP transparencies, Push down the paper guide re- lease lever

Page 40

Copying

		Note
		❒ Set the direction of the copy pa-
		per to L.
		❒ Swing out the extender to sup-
		port paper sizes larger than
		A4L, 81/2" ⋅ 14"L.
		❒ Fan paper to get air between the
	2	❒ Fan paper to get air between the
	2	sheets and avoid a multi-sheet

feed.

Reference

For details about how to set the copy paper, see p.28 “When copying onto OHP transparen- cies”, p.29 “When copying onto standard size paper”, p.29 “When copying onto custom size copy paper” or p.30 “When copying onto envelopes”.

D Push down the paper guide re- lease lever.

When copying onto OHP transparencies

A Press the {User Tools/Counter} key.

B Press the 0 or 1 key to display

“3. Copier Features”, and then press the {OK} key.

C Press the 0 or 1 key to display “6. Bypass Paper Type”, and then press the {OK} key.

Note

❒If you set A4, 81/2" ⋅ 14" or larg- er copy paper, hold the edge of the paper and push down the paper guide release lever.

❒If you do not push down the pa- per guide release lever, a mis- feed might occur.

❒You can specify the type of pa- per used for the bypass tray. See “6. Bypass Paper Type” in p.56 “Copier Features”

E Place your originals, and then

28press the {Start} key.

D Press the 0 or 1 key to display “Special/OHP”, and then press the {OK} key.

E Press the {User Tools/Counter} key to exit from the user tools.

Image 40

Contents 5613 Means Power ON. c means Stand by Safety Information Safety During OperationPage Positions of Labels and Hallmarks for Rwarning and Rcaution How to Read this Manual SymbolsMachine Types What You Can Do with This Machine Table of Contents Troubleshooting Specifications Page Guide to Components On indicator Operation switchControl panel Bypass trayOptions Paper tray unitCopier only Fax and/or printer installed Control PanelFax function keys Fax installed machine only Dial Function keys Fax in- stalled machine onlyPrinter function keys Printer in- stalled machine only Number keysPanel Display Displays and Key OperationsCopy display Common keysTurning On the Power Turning On the Main PowerOperation switch right side of the control panel Main power switch left side of the machineTurning Off the Main Power Press the operation switch to make the On indicator go onTurn off the main power switch Starting the MachineChanging Modes Originals Metric versionInch version Non-recommended originals for the document feeder ADFOriginal Sizes and Scanning Area/Missing Image Area Exposure glass Document feeder ADFCopy Paper Recommended Paper Sizes and TypesNon-recommended Paper Paper Storage Toner Storage TonerUsed Toner Basics Basic Procedure Make sure that the machine is in Copy modePlace your originals Press the Start keyAuto Off Placing Originals Placing Originals on Exposure GlassPlacing Standard Size Originals Loading Originals Document Feeder ADFLimit mark Document guide Placing Custom Size Originals You can also enter this mode by pressing the R/# key Basic Functions Selecting an Original TypeText PhotoSelecting Copy Paper Sort SortSort Enter the number of copy sets with the number keys After all originals are scanned, press the R/# keyCopying from the Bypass Tray When copying onto OHP transparencies Push down the paper guide re- lease leverWhen copying onto custom size copy paper When copying onto standard size paperPress the R/# key When copying onto envelopes Setting the User Code Other FunctionsUser Codes Auto StartPress the Reduce/Enlarge key Preset Reduce/EnlargePress the OK key Place your originals, and then press the Start key Zoom Press the Zoom key Enter the ratioEnter the desired reproduction ratios with the 0 or 1 key Enter the desired ratio with the number keysPortrait K originals CombineLandscape L originals Select with the 0 or 1 key, and then press the OK key Load your originals, and then press the Start keyCombination Chart Following shows the combinations of functionsCopying General Machine Operation ProblemsDisplay Cannot Make Clear Copies Cannot Make Desired Copies CombineLoading paper in the optional paper tray unit HLoading PaperPush the paper tray in until it stops Readjust the back fence and side fences HChanging the Toner Cartridge Regarding toner storage, see p.15 Toner StorageHChanging the Toner Cartridge HClearing Misfeeds HClearing Misfeeds Changing the Paper Size Adjust the back fenceChanging the Paper Size in the Paper Tray Adjust the side and back fences to the new paper size Square the paper and load it in the trayPush the paper tray in until it stops When you have selected Custom Size on step E Selecting the Paper Size with the User ToolsTroubleshooting User Tools Copier Features Accessing the User Tools Copier FeaturesExiting the User Tools User Tools Menu Copier Features Settings You Can Change with the User Tools Copier FeaturesMenu Description User Tools Copier Features Remarks Dos and DontsWhere to Put Your Machine Machine EnvironmentOptimum environmental conditions Environments to avoidPower Connection Access to Machine Cleaning the machine Maintaining Your MachineRemarks Mainframe Copy paper weight Non-reproduction areaFirst copy time Copying speedPower consumption Dimensions W ⋅ D ⋅ H up to exposure glassWeight Noise Emission *1Document Feeder ADF Option for Type Available paper size Paper Tray Unit OptionPaper capacity 32MB Copier Memory Unit Option Memory capacityAdditional functions Number of originals that can be stored about 99 pagesIndex Toner User Codes, 31 User Tools Ventilation hole Zoom Memo UE USA B045