Philips 27254 When the sub source is not Detected, Source, Top-Left Top-Right, Bottom-Left

2. Setting up the monitor
[PIP]: Picture in Picture
Open up a sub-window of
			B
another signal source.
		A (main)

When the sub source is not
		B
detected:
	A (main)

[PBP]: Picture by Picture

Open up a sub-window side-
by-side of another signal	A (main) B
source.

‡PIP Size: When PIP is activated, there are

three sub-window sizes to choose: [Small], [Middle], [Large].

SmallB

A Large Middle

(main)

‡PIP Position: When PIP is activated, there are four sub-window positions to choose.

	Top-Left	Top-Right
B	A (main)		B
		A (main)

When the sub source is not
detected:	A (main)	B

Bottom-Left

A (main)

B

Bottom-Right

A (main)

B

Note

The black strip shows on the top and the bottom of the screen for the correct aspect ratio when in the PBP mode.

‡PIP / PBP Input:There are four different video input to choose as the sub display source: [VGA],[DVI], [MHL-HDMI], and [DisplayPort].

Please refer below table for compatibility of main/sub input source.

		SUB SOURCE POSSIBILITY (xl)
	Inputs	VGA	DP	DVI	MHL-
					HDMI
MAIN	VGA		ʁ	ʁ	ʁ
	DP	ʁ		ʁ	ʁ
SOURCE	DVI	ʁ	ʁ		ʁ
(xl)	MHL-	ʁ	ʁ	ʁ
	HDMI

‡Swap: The main picture source and the sub picture source swapped on the display.

Swap A and B source in [PIP] mode:

	B		A
A (main)		B (main)

Swap A and B source in [PBP] mode:

A (main) B B (main) A

10