Philips 27254 user manual Multiview FAQs

10.Troubleshooting & FAQs

10.4 Multiview FAQs

Q1:	Why I cannot activate PIP or PBP
	when the sources are DVI and MHL-
Ans.:	HDMI"
	Please refer to below table for the main
	source and its supporting sub source.

		SUB SOURCE POSSIBILITY (xl)
	Inputs	VGA	DP	DVI	MHL-
					HDMI
MAIN	VGA		ʁ	ʁ	ʁ
	DP	ʁ		ʁ	ʁ
SOURCE	DVI	ʁ	ʁ		ʁ
(xl)	MHL-	ʁ	ʁ	ʁ
	HDMI

Q2:	Can I enlarge the PIP sub window "
Ans.:	Yes, there are 3 sizes to select: [Small],
	[Middle], [Large].You can press		to
	enter OSD menu. Select your preferred
	[PIP Size] option from the [PIP / PBP]
	main menu.
Q3:	How to listen to Audio, independent
Ans.:	of video"
	Normally the audio source is linked to
	the main picture source. If you want to
	change audio-source input (for example:
	listen to your MP3 player independently
	regardless of the video source input),
	you can press	to enter OSD menu.

Select your preferred [Audio Source] option from the [Audio] main menu.

Please note that the next time you turn on your monitor, the monitor will by default select the audio source you chose last time. In case you want to change it again, you need to go through the above steps to select your new preferred audio source, which then will become the “default” mode.

UAudio Source

Audio in

MHL-HDMI

DisplayPort

52