Philips 27254 Remove the Base Assembly for Vesa Mounting, ‡ Off Stop MultiView function

2. Setting up the monitor

‡ Off: Stop MultiView function.	3. While keeping the release button pressed,
	tilt the base and slide it out.
A (main)

Note

When you do the SWAP function, the video and its audio source will swap at the same time. (Refer to page 6 “Independent audio playbacN, regardless of video input” for more detail.)

2.4Remove the Base Assembly for VESA Mounting

Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury.

1.Extend the monitor base to its maximum height.

Note

This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface.

100mm

100mm

2.Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen.Then lift the monitor stand.

11