10.Troubleshooting & FAQs
In the Windows Start Menu, select Settings/ Control Panel. In the Control Panel Window, select the Display icon. Inside the Display Control Panel, select the 'Settings' tab. Under the setting tab, in box labelled 'desktop area', move the sidebar to 2560 x 1440 pixels.
Open 'Advanced Properties' and set the Refresh Rate to 60 Hz, then click OK.
Restart your computer and repeat step 2 and 3 to verify that your PC is set at 2560 x 1440 @ 60 Hz.
Shut down your computer, disconnect your
old monitor and reconnect your Philips monitor.
Turn on your monitor and then turn on your PC.
Q2: What is the recommended refresh rate for monitor"
Ans.: Recommended refresh rate in monitors is 60 Hz, In case of any disturbance on screen, you can set it up to 75 Hz to see if that removes the disturbance.
Q3: What are the .inf and .icm Àles on the
Ans.: 7KHVHDUHWKHGULYHUÀOHVIRU\RXU
| monitor. Follow the instructions in your |
| user manual to install the drivers.Your |
| computer may ask you for monitor |
| GULYHUVLQIDQGLFPÀOHVRUDGULYHU |
| GLVNZKHQ\RXÀUVWLQVWDOO\RXUPRQLWRU |
| Follow the instructions to insert the |
| companion |
| package. Monitor drivers (.inf and .icm |
| ÀOHVZLOOEHLQVWDOOHGDXWRPDWLFDOO\ |
Q4: | How do I adjust the resolution" |
Ans.: | Your video card/graphic driver and |
| monitor together determine the |
| available resolutions.You can select the |
| desired resolution under Windows® |
| Control Panel with the "Display |
| properties". |
Q5: | What if I get lost when I am maNing | |||||
Ans.: | monitor adjustments via OSD" | |||||
Simply press the |
|
| button, then select | |||
|
| |||||
|
| |||||
| ||||||
| [Reset to recall all the original factory | |||||
| settings. |
| ||||
Q6: | Is the monitor screen resistant to | |||||
Ans.: | scratches" |
| ||||
In general it is recommended that | ||||||
| the panel surface is not subjected to | |||||
| excessive shocks and is protected from | |||||
| sharp or blunt objects.When handling | |||||
| the monitor, make sure that there is | |||||
| no pressure or force applied to the | |||||
| panel surface side.This may affect your | |||||
| warranty conditions. |
| ||||
Q7: | How should I clean the monitor | |||||
Ans.: | surface" |
| ||||
For normal cleaning, use a clean, soft | ||||||
| cloth. For extensive cleaning, please use | |||||
| isopropyl alcohol. Do not use other | |||||
| solvents such as ethyl alcohol, ethanol, | |||||
| acetone, hexane, etc. |
| ||||
Q8: | Can I change the color setting of my | |||||
Ans.: | monitor" |
| ||||
Yes, you can change your color setting | ||||||
| through OSD control as the following | |||||
| procedures: |
| ||||
Press |
| button to show the OSD (On | ||||
| ||||||
| ||||||
| ||||||
Screen Display) menu |
|
Press ɾ button to select the option
[Color] then press button to enter color setting, there are three settings as below.
1.Color Temperature:The six settings are 5000K, 6500K, 7500K, 8200K, 9300K and 11500K.With settings in the 5000K range the panel appears "warm, with a
2.sRGB:This is a standard setting for ensuring correct exchange of colors between different device (e.g. digital
50