Philips CPWBS001 Navigating the Web Browser Interface, DSL modem, Making Configuration Changes

Page 27

ENGLISH 27

 

 

 

 

 

Navigating the Web Browser Interface

 

 

The Wireless Base Station’s management interface features a Setup Wizard

 

 

and an Advanced Setup section. Use the Setup Wizard if you want to

 

 

quickly set up the Wireless Base Station for use with a cable modem or

 

 

DSL modem.

 

 

Advanced setup supports more advanced functions like hacker attack

 

 

detection, IP and MAC address filtering, intrusion detection, virtual server

 

 

setup, virtual DMZ hosts, and other advanced functions.

 

 

Making Configuration Changes

 

 

Configurable parameters have a dialog box or a drop-down list. Once a

 

 

configuration change has been made on a page, be sure to click the APPLY

 

 

or NEXT button at the bottom of the page to enable the new setting.

Note:

 

To ensure proper screen refresh after a command entry, ensure that

 

 

Internet Explorer 5.0 is configured as follows: Under the menu

 

 

Tools/Internet Options/General/Temporary Internet Files/Settings, the setting

 

 

for “Check for newer versions of stored pages” should be “Every visit to the

 

 

page.”

 

 

 

Image 27
Contents Wireless Base Station ➊ ➋ Helpline Table of Contents Technology for people Reset buttonPower Indicator LEDsEnvironmental information Safety PrecautionsPackaging contents Important informationDisclaimer You make any hardware connections Do not make any hardware connections to the Wireless BaseStation until the Setup Wizard asks you to do so Start installing the softwareHow to use the Setup programme Hardware description Connect the System System RequirementsConnecting the Wireless Base Station Basic Installation ProcedureAttach to Your Network Using Ethernet Cabling Attach to Your Network Using Radio Signals Attach the Wireless Base Station to the Internet Modem / Internet port on the Wireless Base StationEnds for all connections Connecting the Power Adapter Installing TCP/IP Setting Up TCP/IPWindows Configuring Your Computer in Windows 98SE/Me Obtain IP Settings from Your Wireless Base Station Dhcp IP ConfigurationConfiguring Your Computer in Windows Dhcp IP Configuration Configuring Your Computer in Windows XPConfiguring a Macintosh Computer Manual IP Configuration for all Windows OS Ping Verifying Your TCP/IP ConnectionBrowser Configuration Disable Proxy ConnectionInternet Explorer 5 or above Internet Explorer for Macintosh DSL modem Setup, virtual DMZ hosts, and other advanced functionsMaking Configuration Changes Navigating the Web Browser InterfaceCable Modem Setup WizardTime Zone Broadband TypePPPoE xDSL Fixed-IP xDSLPptp Point-to-Point Tunneling Protocol Click Finish to complete the setupMenu Description System Password SettingsBase Station Factory defaults. The default is no passwordDefault 9 minutes Remote ManagementDynamic IP Internet SettingsPoint-to-Point Over Ethernet PPPoE Point-to-Point Tunneling Protocol Pptp Static IP DNS Local netwerk LAN Channel and Ssid WirelessAvailable channel settings are limited by local regulations Default Fully AutomaticAvailable options are 1, 2, 5.5, and 11Mbps. Default All Communicates with PCs in its service range. Default AutoEncryption Address Mapping Network Address Translation NATVirtual Server 28800 Special Applications6112 Battle.netFirewall Access ControlMAC Filtering Table As shown in the following screenParental Control Schedule Rule Use this section to create your network schedule rules Enables Schedule-based Internet access controlIntrusion Detection Firewall ConfigurationDMZ Demilitarized Zone Ddns Dynamic DNS Settings UPnP Universal Plug and Play Setting Tools Tools Configuration ToolsTools Firmware Upgrade Complete when the power LED stops blinking Tools RebootDisplays Internet connection type and status Following items are included on this screenStatus Section DescriptionAm getting an IP Address that starts with Troubleshooting10/100 LED does not light after a connection is made Have another IP Address displayedStandards Media Access ControlLED Indicators RF SpecificationOperating Channel RF Output PowerRF Power Consumption RF FrequencyEnglish 0682