Philips CPWBS001 You make any hardware connections, Start installing the software, Base Station

Page 8

8 ENGLISH

	Installing the Wireless Base Station
	Install the Wireless Base Station software from the Installation CD before
	you make any hardware connections.
	Installing the Wireless Base Station client software
	If possible, install the client software on the computer that hosts your
	Internet connection and with which you want to install and manage the
	Wireless Base Station.
Warning:	Do not make any hardware connections to the Wireless Base
	Station until the Setup Wizard asks you to do so.
	1 Place the CD included in the box in your computer's drive and
	start installing the software.
	> The CD should start automatically. If it does not, please double-click "My
	Computer", then the drive icon and finally "Setup.exe" to start the CD.
	2 Follow the on-screen instructions for setting up your Wireless
	Base Station.

3 In the installation program, choose your product from the list and click 'Next' to continue the installation procedure.

>The following elements will be installed:

•Wireless Base Station Client tool

•Manual in PDF format

•Readme document and release notes

4 This concludes the installation procedure. Please see the following sections on connecting, configuring and using the Wireless Base Station.

Should there appear any error messages or requests for additional information on the screen, then please read the entire manual and the "Troubleshooting" section. With the information given in this manual, you should be able to solve any problems with installing and using the Wireless Base Station cable. Please visit our web site www.philips.com if you need further assistance.

Image 8

Contents Wireless Base Station ➊ ➋ Helpline Table of Contents Reset button PowerIndicator LEDs Technology for peopleSafety Precautions Packaging contentsImportant information Environmental informationDisclaimer Do not make any hardware connections to the Wireless Base Station until the Setup Wizard asks you to do soStart installing the software You make any hardware connectionsHow to use the Setup programme Hardware description System Requirements Connect the SystemBasic Installation Procedure Connecting the Wireless Base StationAttach to Your Network Using Ethernet Cabling Attach to Your Network Using Radio Signals Ends for all connections Attach the Wireless Base Station to the InternetModem / Internet port on the Wireless Base Station Connecting the Power Adapter Windows Installing TCP/IPSetting Up TCP/IP Configuring Your Computer in Windows 98SE/Me Dhcp IP Configuration Obtain IP Settings from Your Wireless Base StationConfiguring Your Computer in Windows Configuring Your Computer in Windows XP Dhcp IP ConfigurationConfiguring a Macintosh Computer Manual IP Configuration for all Windows OS Verifying Your TCP/IP Connection PingInternet Explorer 5 or above Browser ConfigurationDisable Proxy Connection Internet Explorer for Macintosh Setup, virtual DMZ hosts, and other advanced functions Making Configuration ChangesNavigating the Web Browser Interface DSL modemSetup Wizard Time ZoneBroadband Type Cable ModemFixed-IP xDSL PPPoE xDSLClick Finish to complete the setup Pptp Point-to-Point Tunneling ProtocolMenu Description Password Settings SystemFactory defaults. The default is no password Default 9 minutesRemote Management Base StationInternet Settings Dynamic IPPoint-to-Point Over Ethernet PPPoE Point-to-Point Tunneling Protocol Pptp Static IP DNS Local netwerk LAN Wireless Channel and SsidDefault Fully Automatic Available options are 1, 2, 5.5, and 11Mbps. Default AllCommunicates with PCs in its service range. Default Auto Available channel settings are limited by local regulationsEncryption Network Address Translation NAT Address MappingVirtual Server Special Applications 6112Battle.net 28800Access Control FirewallAs shown in the following screen MAC Filtering TableParental Control Schedule Rule Enables Schedule-based Internet access control Use this section to create your network schedule rulesFirewall Configuration Intrusion DetectionDMZ Demilitarized Zone Ddns Dynamic DNS Settings UPnP Universal Plug and Play Setting Tools Configuration Tools ToolsTools Firmware Upgrade Tools Reboot Complete when the power LED stops blinkingFollowing items are included on this screen StatusSection Description Displays Internet connection type and statusTroubleshooting Am getting an IP Address that starts withHave another IP Address displayed 10/100 LED does not light after a connection is madeMedia Access Control LED IndicatorsRF Specification StandardsRF Output Power RF Power ConsumptionRF Frequency Operating ChannelEnglish 0682