Philips CPWBS001 manual Point-to-Point Over Ethernet PPPoE

Page 35

ENGLISH 35

Point-to-Point Over Ethernet (PPPoE)

Enter the PPPoE User Name and Password assigned by your Service Provider.The Service Name is normally optional, but may be required by some service providers.

The MTU (Maximum Transmission Unit) governs the maximum size of the data packets. Leave this on the default value (1492) unless you have a particular reason to change it.

Enter a Maximum Idle Time (in minutes) to define a maximum period of time for which the Internet connection is maintained during inactivity. If the connection is inactive for longer than the Maximum Idle Time, it will be dropped. (Default: 10 minutes)

Enable the Auto-reconnect option to automatically re-establish the connection as soon as you attempt to access the Internet again.

Image 35

Contents Wireless Base Station ➊ ➋ Helpline Table of Contents Technology for people Reset buttonPower Indicator LEDsEnvironmental information Safety PrecautionsPackaging contents Important informationDisclaimer You make any hardware connections Do not make any hardware connections to the Wireless BaseStation until the Setup Wizard asks you to do so Start installing the softwareHow to use the Setup programme Hardware description Connect the System System RequirementsConnecting the Wireless Base Station Basic Installation ProcedureAttach to Your Network Using Ethernet Cabling Attach to Your Network Using Radio Signals Ends for all connections Attach the Wireless Base Station to the InternetModem / Internet port on the Wireless Base Station Connecting the Power Adapter Windows Installing TCP/IPSetting Up TCP/IP Configuring Your Computer in Windows 98SE/Me Obtain IP Settings from Your Wireless Base Station Dhcp IP ConfigurationConfiguring Your Computer in Windows Dhcp IP Configuration Configuring Your Computer in Windows XPConfiguring a Macintosh Computer Manual IP Configuration for all Windows OS Ping Verifying Your TCP/IP ConnectionInternet Explorer 5 or above Browser ConfigurationDisable Proxy Connection Internet Explorer for Macintosh DSL modem Setup, virtual DMZ hosts, and other advanced functionsMaking Configuration Changes Navigating the Web Browser InterfaceCable Modem Setup WizardTime Zone Broadband TypePPPoE xDSL Fixed-IP xDSLPptp Point-to-Point Tunneling Protocol Click Finish to complete the setupMenu Description System Password SettingsBase Station Factory defaults. The default is no passwordDefault 9 minutes Remote ManagementDynamic IP Internet SettingsPoint-to-Point Over Ethernet PPPoE Point-to-Point Tunneling Protocol Pptp Static IP DNS Local netwerk LAN Channel and Ssid WirelessAvailable channel settings are limited by local regulations Default Fully AutomaticAvailable options are 1, 2, 5.5, and 11Mbps. Default All Communicates with PCs in its service range. Default AutoEncryption Address Mapping Network Address Translation NATVirtual Server 28800 Special Applications6112 Battle.netFirewall Access ControlMAC Filtering Table As shown in the following screenParental Control Schedule Rule Use this section to create your network schedule rules Enables Schedule-based Internet access controlIntrusion Detection Firewall ConfigurationDMZ Demilitarized Zone Ddns Dynamic DNS Settings UPnP Universal Plug and Play Setting Tools Tools Configuration ToolsTools Firmware Upgrade Complete when the power LED stops blinking Tools RebootDisplays Internet connection type and status Following items are included on this screenStatus Section DescriptionAm getting an IP Address that starts with Troubleshooting10/100 LED does not light after a connection is made Have another IP Address displayedStandards Media Access ControlLED Indicators RF SpecificationOperating Channel RF Output PowerRF Power Consumption RF FrequencyEnglish 0682