Philips CPWBS001 manual Important information, Safety Precautions, Environmental information

Page 6

6ENGLISH

Important information

•Please install and connect the product in the order as described in the chapter "Installing the Wireless Base Station" only.This assures best installation results with the least technical hassles.

•Please read this guide carefully before using the Wireless Base Station; and keep it for future reference.

•The most recent downloads and information on this product will be available through our web site www.streamium.com

•During set-up and installation, it may be helpful to have the instructions for your PC and other network components at hand.

Safety Precautions

•Do not expose the system to excessive moisture, rain, sand or heat sources.

•The product should not be exposed to dripping or splashing. No object filled with liquids, such as vases, should be placed on the product.

•Keep the product away from domestic heating equipment and direct sunlight.

•Allow a sufficient amount of free space all around the product for adequate ventilation.

•Do not open this product. Contact your Philips retailer if you experience technical difficulties.

Environmental information

All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into three mono materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).Your set consists of materials that can be recycled if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment.

Packaging contents

Please check whether all of the following items are present in the box of the Wireless Base Station.These are provided to help you set up and use your Wireless Base Station. Contact your Philips retailer if any items are missing.

•Wireless Base Station

•Power adapter

•Ethernet cable class J45

•Installation CD

•Instructions for Use-booklet

•Getting Started note

Image 6

Contents Wireless Base Station ➊ ➋ Helpline Table of Contents Indicator LEDs Reset buttonPower Technology for peopleImportant information Safety PrecautionsPackaging contents Environmental informationDisclaimer Start installing the software Do not make any hardware connections to the Wireless BaseStation until the Setup Wizard asks you to do so You make any hardware connectionsHow to use the Setup programme Hardware description System Requirements Connect the SystemBasic Installation Procedure Connecting the Wireless Base StationAttach to Your Network Using Ethernet Cabling Attach to Your Network Using Radio Signals Attach the Wireless Base Station to the Internet Modem / Internet port on the Wireless Base StationEnds for all connections Connecting the Power Adapter Installing TCP/IP Setting Up TCP/IPWindows Configuring Your Computer in Windows 98SE/Me Dhcp IP Configuration Obtain IP Settings from Your Wireless Base StationConfiguring Your Computer in Windows Configuring Your Computer in Windows XP Dhcp IP ConfigurationConfiguring a Macintosh Computer Manual IP Configuration for all Windows OS Verifying Your TCP/IP Connection PingBrowser Configuration Disable Proxy ConnectionInternet Explorer 5 or above Internet Explorer for Macintosh Navigating the Web Browser Interface Setup, virtual DMZ hosts, and other advanced functionsMaking Configuration Changes DSL modemBroadband Type Setup WizardTime Zone Cable ModemFixed-IP xDSL PPPoE xDSLClick Finish to complete the setup Pptp Point-to-Point Tunneling ProtocolMenu Description Password Settings SystemRemote Management Factory defaults. The default is no passwordDefault 9 minutes Base StationInternet Settings Dynamic IPPoint-to-Point Over Ethernet PPPoE Point-to-Point Tunneling Protocol Pptp Static IP DNS Local netwerk LAN Wireless Channel and SsidCommunicates with PCs in its service range. Default Auto Default Fully AutomaticAvailable options are 1, 2, 5.5, and 11Mbps. Default All Available channel settings are limited by local regulationsEncryption Network Address Translation NAT Address MappingVirtual Server Battle.net Special Applications6112 28800Access Control FirewallAs shown in the following screen MAC Filtering TableParental Control Schedule Rule Enables Schedule-based Internet access control Use this section to create your network schedule rulesFirewall Configuration Intrusion DetectionDMZ Demilitarized Zone Ddns Dynamic DNS Settings UPnP Universal Plug and Play Setting Tools Configuration Tools ToolsTools Firmware Upgrade Tools Reboot Complete when the power LED stops blinkingSection Description Following items are included on this screenStatus Displays Internet connection type and statusTroubleshooting Am getting an IP Address that starts withHave another IP Address displayed 10/100 LED does not light after a connection is madeRF Specification Media Access ControlLED Indicators StandardsRF Frequency RF Output PowerRF Power Consumption Operating ChannelEnglish 0682