Philips CPWBS001 manual Local netwerk LAN

Page 39

ENGLISH 39

Local netwerk - LAN

•Local Network IP – Use the lLocal Network menu to configure the Local Network IP address for the Wireless Base Station and to enable the DHCP server for dynamic client address allocation.

•Lease Time - Set a period for the lease time if required. For home networks this may be set to Forever, which means there is no time limit on the IP address lease.

•IP Address Pool – A dynamic IP start address may be specified, e.g. 192.168.2.100 (default value). Once this start IP address has been assigned, IP addresses running from 192.168.2.100 to 192.168.2.199 will be part of the dynamic IP address pool. IP addresses from 192.168.2.2 to 192.168.2.99, and 192.168.2.200 to 192.168.2.254 will be available as static IP addresses.

Remember not to include the address of the Wireless Base Station in the client address pool. Also remember to configure your client PCs for dynamic IP address allocation.

Image 39

Contents Wireless Base Station ➊ ➋ Helpline Table of Contents Technology for people Reset buttonPower Indicator LEDsEnvironmental information Safety PrecautionsPackaging contents Important informationDisclaimer You make any hardware connections Do not make any hardware connections to the Wireless BaseStation until the Setup Wizard asks you to do so Start installing the softwareHow to use the Setup programme Hardware description Connect the System System RequirementsConnecting the Wireless Base Station Basic Installation ProcedureAttach to Your Network Using Ethernet Cabling Attach to Your Network Using Radio Signals Attach the Wireless Base Station to the Internet Modem / Internet port on the Wireless Base StationEnds for all connections Connecting the Power Adapter Installing TCP/IP Setting Up TCP/IPWindows Configuring Your Computer in Windows 98SE/Me Obtain IP Settings from Your Wireless Base Station Dhcp IP ConfigurationConfiguring Your Computer in Windows Dhcp IP Configuration Configuring Your Computer in Windows XPConfiguring a Macintosh Computer Manual IP Configuration for all Windows OS Ping Verifying Your TCP/IP ConnectionBrowser Configuration Disable Proxy ConnectionInternet Explorer 5 or above Internet Explorer for Macintosh DSL modem Setup, virtual DMZ hosts, and other advanced functionsMaking Configuration Changes Navigating the Web Browser InterfaceCable Modem Setup WizardTime Zone Broadband TypePPPoE xDSL Fixed-IP xDSLPptp Point-to-Point Tunneling Protocol Click Finish to complete the setupMenu Description System Password SettingsBase Station Factory defaults. The default is no passwordDefault 9 minutes Remote ManagementDynamic IP Internet SettingsPoint-to-Point Over Ethernet PPPoE Point-to-Point Tunneling Protocol Pptp Static IP DNS Local netwerk LAN Channel and Ssid WirelessAvailable channel settings are limited by local regulations Default Fully AutomaticAvailable options are 1, 2, 5.5, and 11Mbps. Default All Communicates with PCs in its service range. Default AutoEncryption Address Mapping Network Address Translation NATVirtual Server 28800 Special Applications6112 Battle.netFirewall Access ControlMAC Filtering Table As shown in the following screenParental Control Schedule Rule Use this section to create your network schedule rules Enables Schedule-based Internet access controlIntrusion Detection Firewall ConfigurationDMZ Demilitarized Zone Ddns Dynamic DNS Settings UPnP Universal Plug and Play Setting Tools Tools Configuration ToolsTools Firmware Upgrade Complete when the power LED stops blinking Tools RebootDisplays Internet connection type and status Following items are included on this screenStatus Section DescriptionAm getting an IP Address that starts with Troubleshooting10/100 LED does not light after a connection is made Have another IP Address displayedStandards Media Access ControlLED Indicators RF SpecificationOperating Channel RF Output PowerRF Power Consumption RF FrequencyEnglish 0682