Fujitsu MB88121 SERIES, MB91460 SERIES Software Installation Installation of Softune Workbench

SK-91F467-FLEXRAY V1.1

Installation

2.3Software Installation

2.3.1 Installation of Softune Workbench

Fujitsu supplies a full working 32bit development environment with the “SK-91F467- FLEXRAY” starter kit called Softune Workbench V6. The Softune Workbench also supports a monitor debugger which is pre-programmed into the internal Flash memory of the “SK- 91F467-FLEXRAY”. To develop own software and to work with the Monitor Debugger of the “SK-91F467-FLEXRAY” the Softune Workbench development environment must be installed first. Follow the instructions for successful installation of the Softune Workbench.

1)Before starting the installation setup ensure that you are logged in with administrator or power user permissions, otherwise the Softune installation will fail! Be aware that Softune does not support multi-user support. Therefore install- and user login must be the same.

2)Browse on the starter kit CD-ROM into the directory Software\SWBInstall and start the setup.exe

You can also start the installation using a browser by opening the index.html of the CD-ROM. Use the link “Software\Softune Workbench\” in the left side frame.

3)Follow the installation instructions

4)For the default installation path it is recommended to use c:\Softune32

5)After the installation is finished, Softune Workbench for FR can be started via the Windows “Start” menu

Figure 2-7: Softune Workbench start menu location

6) When Softune Workbench is started the following window will be shown

© Fujitsu Microelectronics Europe GmbH - 17 - FMEMCU-UG-910017-11