Flash Programming
6 Flash Programming
6.1Programming internal Flash of MB91F467DA series
To program the Monitor debugger or any other Application into the internal Flash memory of MB91F467DA series following steps must be taken.
1)To install the Flash Programming utility on the PC the following steps must be taken
a.Browse to the folder “Software\FlashProgramming” of the starter kit
b.Start Flash Programming tool by double click flash.exe within the installed folder: C:\Softune6\Utility\FME_FlashProgrammer_v3_7\flashprg.exe
2)Open the Flash programming Utility by double click the flashprg.exe file
3)Select CPU type, COM Port, baud rate, Hex File as shown in the following figure
a.Device Type: MB91F467D
b.Com port: 1
c.Baudrate: 38400
d.Hex File: MonDeb91467D.mhx Use button “Browse” and browse to
c:\..\Software\MonitorDebugger\ MonDeb91467D.mhx
a 
6
c
d
Figure 6-1: FME FR-Flash Programmer for MB91F467D series
© Fujitsu Microelectronics Europe GmbH | - 61 - |