Black Box servswitch 4site flex, KVP40004A manual Hardware Description, Front Panel

Chapter 2: Overview

2.4 Hardware Description

Figures 2-5 and 2-7 show the front and back panels of the ServSwitch 4site Flex. Tables 2-1 and 2-2 describe their components.

2.4.1 Front Panel

3 4 5 6

2

1

		7	8	9	10
		Figure 2-5. Front panel.
		Table 2-1. Front-panel components.
Component
Number in
Figure 2-5	Component	Description
1	Buttons 1–4	These buttons activate the corresponding channel (computer port).
		When these LEDs light green, the corresponding channel (computer port) has been selected and is available for keyboard and
		mouse access. When an LED flashes green, there is no signal at the video input of the selected channel. An LED lights yellow
2	LEDs 1–4	when there is a signal at the video input, but another channel has been selected. When the LED is dark, there is no signal at
		the video input and another channel has been selected. The LEDs light blue when Win Mode preset configuration is being
		selected.
3	Full LED	This LED lights green when the unit is in Full-Screen mode.
4	Quad LED	This LED lights green when the unit is in Quad mode.
5	PiP LED	This LED lights green when the unit is in picture-in-picture (PiP) mode.
6	Win LED	This LED lights green when the unit is in Win mode.
7	Full button	Press this button to switch to Full-Screen mode.
8	Quad button	Press this button to switch to Quad mode.
9	PiP button	Press this button to switch to PiP mode.
10	Win button	Press this button to switch to Win mode.

724-746-5500 blackbox.com Page 13