Chapter 12: Hotmouse
.
Figure 12-22. Single scan: Cycles through the PiP images at a set interval.
Win mode
Use the section “Mode” in the hotmouse menu in WIN mode to save the position of your channel windows. Four different configuration sets can be saved under win1, win2, win3 or win4.
1.Enter Win mode.
2.Position and/or resize your channel windows as desired.
3.Activate the hotmouse menu.
4.Select one of the win slots.
5.Click “Save” at the bottom of the hotmouse menu.
Figure 12-23. Win mode screen.
Page 84 |