Black Box servswitch 4site flex manual Connecting Video Sources/Computers, Connecting USB Devices

Page 17

Chapter 3: Installation

NOTE: The maximum cable length for video (DVI/VGA) is up to 64 feet (20 meters). Maximum cable length for USB/PS2 keyboard and mouse is up to 16 feet (5 meters). For greater distances, ServSwitch 4site Flex supports most KVM extenders, video (DVI / VGA) extenders, and USB extenders.

3.3 Connecting Video Sources/Computers

1.Switch off the computer and disconnect the keyboard, monitor and mouse.

2.Connect keyboard and mouse ports of ServSwitch 4site Flex to the computer ports either with a single USB cable or via the PS/2 interface (use the Y cable) up to 5 meters. For greater distances use a KVM or USB extender.

3.To connect an analog video / computer source (VGA) to ServSwitch 4site Flex, use a VGA-DVI cable. Digital video sources are connected via a DVI cable up to 20 meters. For greater distances, use a DVI or VGA extender.

3.4 Connecting USB Devices

Connect a USB device to one of the four transparent USB ports to switch it to computers connected to ServSwitch 4site Flex. ServSwitch 4site Flex supports transparent USB devices such as printer, external memory, 3D mouse, and finger printer.

 

 

 

 

 

PS/2 “Y” cable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Keyboard

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mouse

 

 

 

 

 

 

 

 

or USB cable (A–B)

 

 

Keyboard

 

 

 

and mouse

 

 

 

 

 

 

 

 

 

 

Digital or

 

 

DVI-I HD15 or DVI cable

 

 

 

 

 

 

 

 

analog

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connect USB

devices

Figure 3-3. Typical installation.

3.5 Powering Up the System

Switch on ServSwitch 4site Flex with the power switch on the rear panel. All front-panel LEDs light up briefly, indicating that ServSwitch 4site Flex is ready for operation. ServSwitch 4site Flex is now in Quad mode (default).

Power up all connected computers. ServSwitch 4site Flex recognizes all input video sources automatically and displays them on your monitor screen.

To select another display mode, use the relevant keyboard commands or buttons on the front panel.

3.6 Connecting Audio

The ServSwitch 4site Flex can be connected to external, powered speakers or audio devices so that sound coming from the four connected sources can be played back.

Three different connection options are made available (see Figure 3-4):

1.3.5-mm analog stereo jack

2.Digital cinch connector

3.TOSLINK optical audio jack

724-746-5500 blackbox.com

Page 17

Image 17
Contents ServSwitch 4site Flex Trademarks Used in this Manual Trademarks Used in this ManualFCC and IC RFI Statements NOM Statement Safety Guidelines Safety GuidelinesTable of Contents 10.1 100 Specifications SpecificationsOverview Introduction OverviewWin mode screen USB and Keyboard for Keyboard/Mouse/Touchscreen/Trackball Features DVI and VGATransparent USB OperationFront Panel Hardware DescriptionSelector Back PanelBack-panel components Connecting the Unit to Power InstallationInstallation Connecting USB Devices Connecting Video Sources/ComputersPowering Up the System Connecting AudioAudio out Powered speakers Headphones Amplifier On-Screen Display On-Screen Display OSD-Overview On-Screen DisplayOSD-Main Menu Window Three ways to open the OSD main menu window Navigation with Keyboard Navigation Using the Buttons on the Front PanelOSD-Navigation OSD System 4.4.1 Hdcp Status SystemHotkey screen HotkeyHotmouse Quad Mode Win Mode OSD Language OSD Position14. SystemSecurity screen Security LevelsSystem Hdcp Console Video OUTPUT/EDID Input Status Computer Disable Channel Control 16. Quad mode example19. DCP control example 20. SystemControl, DCP mode Synchronize selected Console Keyboard Maximum security levels OSD Mode Current OSD ModePiP Triple gap Single fixed mode Single direct 11. PiP video sources displayed one after the other Test Pattern 14. Test patterns Recall OSD ConfigurationOSD Configuration Backup Factory Reset/Defaults Console Keyboard OSD Console Video Output OSD ConsoleTouchscreen KeyboardDevice details screen OSD Console ConsoleFade screen FadeBackground Multi MonitorOSD Console Edid Display of Monitor Data OSD Video Input Status Display Video Formats OSD VideoRotation DVI/VGAVIdeo/Rotation example CroppingBrightness/Contrast with Analog Input Only VideoScreen Width screen Screen Width with Analog Input OnlyFormat Phase with Analog Input OnlyOSD Video 12. PiP mode for wide-screen monitors OSD Computer Channel Mapping OSD ComputerAudio Name Mouse EDID/DDC Reset PS/2OSD Computer OSD Computer ENTER/SELECT OSD-USB Device USB Port Status OSD-USB DeviceSwitching Mode USB DeviceChange Name screen Change Device NameOSD Help OSD HelpActivating the Hotmouse Cursor HotmouseExample Switch active channel from 1 to Hotmouse Cursor in Full-Screen Mode/Quad ModeHotmouse Cursor in PiP Mode Scaling PiP images up Hold left mouse button Hotmouse Cursor in Win ModeHotmouse Menu Activating/Operating 13. Help screen Mode-Quad, Full, PiP, or Win 14. Hotmouse menu in Quad mode17. Full-Screen mode Hotmouse menu-PIP mode 21. Single fixed and direct PiP image screens 23. Win mode screen Shipping and Packaging TroubleshootingTroubleshooting Contacting Black Box Appendix A. Keyboard Commands Appendix a Keyboard CommandsAppendix a Keyboard Commands Appendix B. Device Configuration Program Appendix B Device Configuration ProgramSettings Click the device configuration button Appendix B Device Configuration Program Appendix B Device Configuration Program Figure B-6. Storing a configuration Loading a configuration Appendix C Update ServSwitch 4site Flex Firmware Appendix C Update ServSwitch 4site Flex FirmwareAppendix C Update ServSwitch 4site Flex Firmware Appendix D. Serial Cable Appendix D Serial CableAppendix E. DCP-XML Remote Control Appendix E DCP-XML Remote ControlAppendix F. Supported Touchscreen Controller Appendix F Supported Touchscreen ControllerAppendix G. Supported Video Input Appendix G Supported Video InputTable G-1 . Video input display video formats Appendix H. Supported Video Output Appendix H Supported Video OutputTable H-1 . Video output display video formats Appendix I. Cascading Appendix I CascadingBlackbox.com Black Box Tech Support FREE! Live /7